Jump to content
SAU Community

Recommended Posts

Spotted HOTTEE R33 Today on Lane Cove Rd didnt really get a good look at the driver but from the angle I was it she looked ok hahaa

Also W34PN on Homebush Bay Drv looks wicked and sounds good too

Cheers :thumbsup: Wait for the kit to go on and then the other parts :yes: what were you in?

I also spotted TAK 33R I think it was the plates on the bridge. Gave the thumbs up got a wave. cheers!

BBM No. Plates in red. White R34 GT-R

1.30pm Forge St Blacktown. I'm heading south. He's heading north. We both keep to the left. We both stop.

Fernando! He's replaced his Lenso D1Rs with TE37s. But even then, he was too late to catch up with Black_Widow.

spotted a few lines this weekend, one that stands out is the bayside r34 gtr that I drove past in Penrith, got a wave from the driver :) ORSOM I think the plates were? or some thing along those lines.

BBM No. Plates in red. White R34 GT-R

1.30pm Forge St Blacktown. I'm heading south. He's heading north. We both keep to the left. We both stop.

Fernando! He's replaced his Lenso D1Rs with TE37s. But even then, he was too late to catch up with Black_Widow.

hehe i was about to add the same thing.

Also spotted Terry in his fine looking R34 GT-R!

And found out of his intentions to purchase something new :(

Cheers :P Wait for the kit to go on and then the other parts ;) what were you in?

I also spotted TAK 33R I think it was the plates on the bridge. Gave the thumbs up got a wave. cheers!

Ahhh was that you dude haha I was in my sisters black lancer I dont think you noticed it though. Yeah ur car looks tough the plates are cool aswell haha

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...