Jump to content
SAU Community

Pivot baby turbo timer wiring

sewid

By sewid,
in Engines & Forced Induction

 Share

Recommended Posts

  • 4 weeks later...
Rb20_4valve Collaborator

Rb20_4valve

Posted
Posted

i asked this question like 6months ago i ended up gettin the wires and i still havent installed it

dam motavation

red = key off

yellow = key on

blue = acc or IG2

black = body

brown = brake switch

orange = no use

i hope these are rite

get in there big dog

:D

  • 3 years later...
zero'sR32 Collaborator

zero'sR32

Posted
Posted (edited)

i just installed this to my car, very good little unit.

dnt worry about that dial on the back... just leave it

red is live, yellow and blue is acc.

brown is handbrake - wont work with this not connected.

black is ground

leave orange out nothing.

Edited by zero'sR32
  • 3 weeks later...
rsx84 Veteran

rsx84

Posted
Posted

a couple of people have asked me about the english version i have, which was posted here but no longer, if you go to

http://pivotjp.com/download/flame-download-e.html

this is a link to the english website which has all the pivot manuals in pdf form.

whats really funny is i haven't installed it yet and i bought it for $280 5 years ago. sad face....

  • 3 months later...
turbo_brian Community Regular

turbo_brian

Posted
Posted
orange = no use

i hope these are rite

get in there big dog

:blush:

The orange wire is RPM sensor.

Because this timer is a true auto-timer, it senses the amount of time above a certain RPM, and adds time to the count-down accordingly to the way it's been driven.

Having said that it can be set up in manual mode, where it is always set for xx number of seconds to shut-down no matter how it's driven.

B.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...