Jump to content
SAU Community

Recommended Posts

i have an R32 GTR, about 2000k out of a rebuilt and the red light on my oil pressure guage turned on.

i checked the oil and it was a little low and needed a change so i changed the it yesterday (castrol edge 10w-60w) and the light is still on...

is the light for oil level or low pressure? i'm worried can anyone shed some light on the situation?

cheers.

Link to comment
https://www.sau.com.au/forums/topic/292652-oil-pressure-guage-light/
Share on other sites

Red light mean NO oil pressure. I would be very concerned.

Only quick test you can do is put another aftermarket oil gauge and sender unit on the motor to confirm its not the origanal oil sender unit and guage. The oil sender units have been known to not show oil pressure properly so check it out.

If you tried the above and still no oil pressure, youve got a prob with your oil pump bud.

Red light mean NO oil pressure. I would be very concerned.

Only quick test you can do is put another aftermarket oil gauge and sender unit on the motor to confirm its not the origanal oil sender unit and guage. The oil sender units have been known to not show oil pressure properly so check it out.

If you tried the above and still no oil pressure, youve got a prob with your oil pump bud.

thanks mate,

but what i don't understand is that there is still a pressure reading on the dial itself, between 0 and 2 on idle and with higher revs it goes to around 4 which is what i thought was pretty normal?

also wouldn't "no" pressure affect oil or water temp? i have an aftermarket water temp and the car runs quite cool...

i hope it's not the pump, it's a nitto and i paid 1200 odd for it :-/

Sounds like a faulty sender for the light, when they go they are usually stuck on, they short out in the body. I'd go to a workshop and get them to check your oil pressure, but if your gauge is showing 2 to 4 [which is about right] then I'd say you have nothing to worry about - but get it checked!!!!

If its the oil light sender, around $20 will get you a new one. By the way they are generally - not always, but generally - set up to turn on at 7psi [0.5kg/cm2] or less. So if you don't make 7 psi then it will be on.

Sounds like a faulty sender for the light, when they go they are usually stuck on, they short out in the body. I'd go to a workshop and get them to check your oil pressure, but if your gauge is showing 2 to 4 [which is about right] then I'd say you have nothing to worry about - but get it checked!!!!

If its the oil light sender, around $20 will get you a new one. By the way they are generally - not always, but generally - set up to turn on at 7psi [0.5kg/cm2] or less. So if you don't make 7 psi then it will be on.

ok, will do..

thanks heaps hey, i was starting to get worried i'd be up for $1000s again :-/

don't get me wrong, i'll get it checked but this just gives me loads more optimism.. haha

appreciate it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...