Jump to content
SAU Community

Recommended Posts

I'm gonna venture a guess into that jerky feel you get when coming off the throttle in a manual...

I've noticed it heaps too, coast along in 1st gear with half throttle, then take your foot off the accelerator, and you'll feel a real jerky situation.

Not sure, but its something to do with your ECU turning off your injectors when there's no throttle input, then it upsets the gearbox and all the slack in the drivetrain (clutch, gearbox, diff, final drive etc.). The jerky feeling is the shock that by turning off the injectors, the engine is no longer turning the drivetrain and the wheels, but rather the car's motion along the road causes the wheel to turn the drivetrain and engine instead... The shocking back and forth is all the slack in the drivetrain being taken up and let off etc...

Anyone get my drift?

Edited by turbo x-trail
  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

I here what your saying X-trail, sounds very plausible. Best way to combat it is if you are coming completely off throttle in such a low gear, clutch in a little and problem solved. Because you are then no longer engaging the driveline

You've read it a few times and still didn't know what he was talking about?

How about you shut up now.

Yeah it's not to do with speed bumps as such or the jerky spaz clutch action that beginners/learners have.

I was thinking it may be something to do with my seat position also, like it's giving my leg/foot too much freedom (or something) to move back/fwd or up/down involuntarily?

What I am basically saying is...hit bump and G's force foot on throttle, car accelerates...acceleration moves weight back and foot lifts off throttle a bit, car then decelerates, weight moves forward and foot is forced on throttle...car accelerates moves weight back and foot lifts off and process repeats.

Like I said it's in 1st and 2nd mostly. If I'm in 3rd then there seems to be more a dampening effect, as the car doesn't accelerate or decelerate so much with the same throttle inputs.

What I am basically saying is...hit bump and G's force foot on throttle, car accelerates...acceleration moves weight back and foot lifts off throttle a bit, car then decelerates, weight moves forward and foot is forced on throttle...car accelerates moves weight back and foot lifts off and process repeats.

wtf is your seat sitting on a single spring bouncing around in your cabin? :)

On a semi-related note... has anyone ever had trouble with atmospheric BOVs causing your car to shudder hardcore when you release the throttle slowly? Does that mean it's too tight?

I think I had a turbosmart on for a while for funsies but have gone back to a stock GTR bov.

I just drove to subi and did some experimenting on the terrible roads around there.

I think my driving style has been to control the throttle with the middle/arch of my foot, this means that any involuntary movements of my foot due to acceleration/deceleration have quite alot of leverage over the throttle. If I use my toes or ball of foot then bumps have less effect.

It just feels a bit unnatural and I'll have to get used to it.

not sure what its called but know how you prevent it

its called "throttle control" - it sounds stupid I know..

(dad taught me when I started 4WDing)

Wait so you dont know what its called... but its called throttle control :)

Lol i love how this thread is two pages of trying to figure out what the OP means haha.

I have definitely experienced what X-Trail was saying, with the too low revs causing the car to lurch horribly. Because of that, i engine brake down to about 20kms if im slowing to a stop, but i don't bother going to 1st, i just put it in neutral otherwise it jumps a bit.

But i don't see how going over a bump would cause that. From what Joe is saying it is the bump causing the car to bounce up which brings the accelerator up against his foot (I can't imagine it is G-forces pushing your foot down lol, that would be some insane vertical G's), and then this occurs several times causing the car to lurch... Am i on the right track Joe?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...