Jump to content
SAU Community

Recommended Posts

Hey Guys,

Car is a R33 S2, stock bar Exhaust, FMIC and Pod. Today when i was driving, i gave it a little stab, then backed off. It was making popping (backfiring) noises whilst decelerating after that. So gave it another little stab, and it didn't do it as much, but as soon as i put my foot down on the accelerator, even 1mm, literally just touching it, it would make the same popping noise.

It was 37 degree day today, so not sure if that has anything to do with it. Car is due for a 100k service shortly.

I'll take it for another drive later and see if its still doing it, but any ideas in the meantime?

Cheers in advanced for any help.

Link to comment
https://www.sau.com.au/forums/topic/294673-weird-popping-noise/
Share on other sites

Still doing it. I think when i pull everything apart to do the timing belt, i might replace the O2 Sensor, get the AFM cleaned, wack a new set of plugs in her, and reset the ecu. Sounds to me likes its overfueling (My old 1JZ Z20 Soarer had a similar problem when we were adjusting fuel mixtures on the Wolf3d) so i'll see how that all goes.

If anyone else has any suggestions, let me know.

Still doing it. I think when i pull everything apart to do the timing belt, i might replace the O2 Sensor, get the AFM cleaned, wack a new set of plugs in her, and reset the ecu. Sounds to me likes its overfueling (My old 1JZ Z20 Soarer had a similar problem when we were adjusting fuel mixtures on the Wolf3d) so i'll see how that all goes.

If anyone else has any suggestions, let me know.

Most likely you are lean which could be for a ton of reasons related to timing issues ,fuel delivery system, intake leak, etc.

Also could be running too rich just when you accelerate then back off the throttle.

Getting boost issues? De-catted?

what your experiencing is 100% normal

wen ur foot is "1%" on throttle as u say, during deceleration, the injectors are spitting out a tiny bit of fuel that isnt fully combusting and makes popping noises in ur exhaust coz its combusting there instead

if its still doing it during deceleration, with ur foot fully off the accelerator, ur injectors r leaking tiny drops (possibly from the o-rings or internally)

has your fuel economy changed?

Completely normal for a lightly modified skyline, with some light taps of the accelerator on deceleration I can get some decent backfires. Under normal deceleration mine doesn't make to much noise, but because I always hell-and-toe to match RPM when changing down gears it's pretty typical to hear me pulling into slip lanes with a loud series of put-pop-pop-pop-put-pop-pop.

On cold nights with a well timed gear change it's not uncommon to get a decent "fwop!" kind of noise as the fuel in my exhaust ignites.

...stopped doing it???????????

OH NO! Now something has gone wrong!!!

lol ;)

Hahaha. Thats what i thought. :thumbsup:

But in all seriousness, i've been in quite a few RBs, and none of them made this noise. Oh well, she'll be right. :cheers:

I had the exact same issue a couple of days ago(when it was stinking hot)

The car was outside all day.

I found it hard to start, had to actually pump the accelerator pedal to get it to fire up

Would pop multiple times on low de-acceleration (1.5-2k rpm), it drove on boost fine.

Next morning it was back to normal again - I think it was heat soak.

I had the exact same issue a couple of days ago(when it was stinking hot)

The car was outside all day.

I found it hard to start, had to actually pump the accelerator pedal to get it to fire up

Would pop multiple times on low de-acceleration (1.5-2k rpm), it drove on boost fine.

Next morning it was back to normal again - I think it was heat soak.

Excellent.

could also be an exhaust leak somewhere. that is a common cause of popping on decel. a mate of mine had a cracked header in his falcon and it would backfire and shoot flames about 2 foot out the exhaust when he lifted off. was somewhat amusing to watch at night.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That M3 looks like it handles so well, initial slight understeer on turn in followed by oversteer which is cancelled out as steering returns to centre. Looks like such a fun car to drive. In comparison the Skyline and Sierra look like they understeer more and thus need more heavier steering inputs...? 
    • Gday   on the hunt for an rb25 gearbox and clutch to go into my R32 rb25/30 build happy to travel a bit or pay for freight for the right one From my limited research, think I need an rb25 driveshaft yoke to make it fit so I’m after one of those too located Bathurst
    • Common for single gauges to be swapped around. My 33 GTST when I bought it had a GTR tacho fitted, everything else was GTST gauges.
    • Google says for a 1998 Nissan Maxima to pull/pry, and the metal pin might even come out with it. I'd do a bit more googling, there was a few videos, find some where the shafts/needles appear most similar and compare the techniques.
    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
×
×
  • Create New...