Jump to content
SAU Community

Recommended Posts

  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

hey buddy, sorry for late reply, do have all the lines however matt might be needing them with his new engine, but will double check as i think i have a second set aswell of all the lines somewhere, will chase it up and get back to you,(Troy)

Thanks mate. Let me know.

Hey mate,

Do you the have front inner splash guards?

Mike

I'll shot gun this answer as I also wanted this! :D

He's apparently keeping it unless he's changed his mind. I'm also after this.

You got complete stock airbox (snorkel included)?

Also, RHS A-pillar trim if there aren't any holes or marks at all?

If so, how much posted to 3199 - PM if you prefer to.

Cheers

Grant

Well?

sorry everyone for slow replys working 12 hour days

- sorry my brother in law is keeping inner guards because they are in good cond, he has gtr

-do not have complete air box

-selling a pillar trims together as they have the standard tweeters in them price is in the list, would be 150 plus postage

costs, thay have very few minor scratches

Matt,

Thanks for getting back to me.

I think I'll pass on A-pillar as I'm only after RHS anyway.

Also PM me your best price on PFC HC (is it FCC3 suitable for BNR32/BCNR33)?

Cheers

Grant

I bought the brakes, and just wanted to say that Troy's an honest seller. After looking at the car, it would have been easy for someone dodgy to to dodge it up and sell it with the rust covered but he's chosen to sell the parts and be legit about it all. I'd trust this bloke y'all!

Yeah, Troy is a top bloke...wrapped everything very well and prompt communication and postage too! Awesome! I've left traders comments for you mate - please do the same for me too! THanks.

-sorry mike, wont be able to get you power window motor in time as i am going away for work for two weeks, and a mate might be taking whole door anyway.

-sorry woo hoo the drivers control module is gone also

-Darkryda someone in adelaide has put shotgun on steering wheel already if it falls through will let you know.

-front inner guards are sold already including all diffusers that are under car(godzilla4me)

-goodwin front bar (both) are sold

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...