Jump to content
SAU Community

Adm Vs Jdm - Pros And Cons Of Each


Recommended Posts

Bad things about ADM's that I know of.

- No auto lights

The funny thing is this is only half true. The ADM cars don't have the lumnar dection system system true BUT if you leave your main lights on constantly the lights actually automatically switch off when you turn the car off (so they aren't left with the parkers on / give you a flat battery).

So I just leave my lights in the ON position 100% of the time and drive with the lights on during the day as well as at night.

That almost needed to go into the useless facts thread but I just thought I'd clarrify it slightly since it was raised in here.

:(

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

The funny thing is this is only half true. The ADM cars don't have the lumnar dection system system true BUT if you leave your main lights on constantly the lights actually automatically switch off when you turn the car off (so they aren't left with the parkers on / give you a flat battery).

So I just leave my lights in the ON position 100% of the time and drive with the lights on during the day as well as at night.

That almost needed to go into the useless facts thread but I just thought I'd clarrify it slightly since it was raised in here.

:(

this is the same system on my mum's 1991 soarer TT - the lights switch off once the car is off and the door opens - every time i borrow the car, i drive like this - "with the lights on" but mum does it oldschool

it's a good little system - however... if you have a turbo timer.. you get out - car running, close the door, car switches off but door doesn't open, meaning - lights stay ON

she's flattened the battery twice cos of my style of driving... which is like 90% my own fault thoguh

Just to confirm JDM R35 GTRs are still available to import as long as they were manufactured before 20 Feb, 2009. RVCS Entry No.: 477/01. I searched the website to try and find out the exact number of km allowed but wasn't able to find it.

One thing that no-one has mentioned is that JDM R35 GTRs can only be registered as 2 seaters. I know that the rear seats are tiny but with the ADM cars you are allowed to put a passenger in the back.

2 seaters? Can I ask your source on this?

Just test drove an ADM... boy...

FTG Nissan - 183k drive away Premium Gun Metal.

Funny thing is if you accidentially switch your traction control off (which would be VERY easy to do, it's right near the suspension change knob) then your warranty is void. So much for local support.

2 seaters? Can I ask your source on this?

Just test drove an ADM... boy...

FTG Nissan - 183k drive away Premium Gun Metal.

Funny thing is if you accidentially switch your traction control off (which would be VERY easy to do, it's right near the suspension change knob) then your warranty is void. So much for local support.

Just to clarify a point ,

there is a misonception out there that as soon as you turn the traction control off, the warranty is void.

The car doesnt lose the warranty by the flick of a switch.

What the warranty states is explicit instructions regarding the appropriateness of turning the traction control off which is if stuck in snow or mud.

Now if you chose to drive the with the traction control off and then for some reason damage the drivetrain. If that was directly attributed to your driving whilst " the traction control is off" then yes, chances are Nissan would reject your drivetrain warranty.

In saying that its not easy to turn off the traction control accidentally, you need to hold it down for a couple of seconds.

I think the whole VDC off thing (somehow causing damage and having warranty implications) is a bit of a furfy, surely. Think about it, wouldnt modulating the drivetrain (on-off-on-off) cause more drivetrain shock then just letting it spin freely? And yeah, the whole "turn VDC off and your warranty is toast" idea is just untrue. It's amazing how many misconceptions are out there with this car. I've given up trying to correct people when they expouse their GTR wisdom. One guy recently asked me if my 35 was the V6 or V8 version. I just told him V6. He went to some lengths to tell me the Jap version is V8... I just didnt bother. Anyway havent they revised the whole VDC off policy for the UK cars?

i believee you still can import the early model r35 GTR , as i get emails from prestiage and other guys selling JDM r35's

Jap R35 GTR around $122k landed ?!

aus spec R35 GTR $175 K on the road ?!

50 odd k difference....i know which one i would get.....

If I read correctly on the Prestige website, the prices quoted don't include luxury car tax, so you would need to add another 33% to the price. So if you pay $122,000 for the car it will end up around $160,000 with LCT. Is this correct?

If I read correctly on the Prestige website, the prices quoted don't include luxury car tax, so you would need to add another 33% to the price. So if you pay $122,000 for the car it will end up around $160,000 with LCT. Is this correct?

i think LCT is applied over the threshold (dunno if it's still $57k?) so not quite, no.

I think the whole VDC off thing (somehow causing damage and having warranty implications) is a bit of a furfy, surely. Think about it, wouldnt modulating the drivetrain (on-off-on-off) cause more drivetrain shock then just letting it spin freely? And yeah, the whole "turn VDC off and your warranty is toast" idea is just untrue. It's amazing how many misconceptions are out there with this car. I've given up trying to correct people when they expouse their GTR wisdom. One guy recently asked me if my 35 was the V6 or V8 version. I just told him V6. He went to some lengths to tell me the Jap version is V8... I just didnt bother. Anyway havent they revised the whole VDC off policy for the UK cars?

He is probably confused with the non-road going GT500 race car.

Eg. http://www.motorauthority.com/blog/1025370...ered-gt500-gt-r

Ah okay, so it would be $140,000 or close to that.

Still a $40,000 saving over Aus delivered.

Don't forget that the resale will be less as well....so it will only help someone that can't raise the RRP for an Aust Delivery....

Considering that I have full Local Dealer support/warranty and better resale value .......

He is probably confused with the non-road going GT500 race car.

Eg. http://www.motorauthority.com/blog/1025370...ered-gt500-gt-r

Maybe, but seemed to think you could buy a v8 for the raod (and asked which one mine was!).

Lame.

  • 1 month later...
  • 4 months later...

Bit of thread mining, sorry.

Can anyone confirm the MP3 capability of the 2009 ADM cars? Will it take a CD or DVD with raw MP3's on it?

Or do i need to burn a regular audio CD?

If regular CD only, how have you gone with burning CD's, some cars/audio systems want them burned in a specific way (slow burn rate) otherwise they dont work too well. Anyone?

Edited by LSX-438
Unfortunately you have to burn an audio cd I think which limits the number if tracks

I used iTunes to do it/toast for mac

Mark,

i burnt a data CD (with MP3's) and it works ok (!!).

i noticed it takes a while to start (like 15~20 seconds) - it must be doing something to index or analyse the files, but it works. So this means we can put 100+ songs on a CD i suppose, whohoo! easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
×
×
  • Create New...