Jump to content
SAU Community

Advise Needed Please - What Do I Go For?


Recommended Posts

Hello,

Please be patient cause I don't know too much about all this...

Getting confused between which fuel control to go for.....

Reading up about Power FC's and SAFC and AFC's etc and it's confused the crap out of me...

Which is the best one to go for to suit my RB25DET Neo motor.

Appreciated ;)

hello sandra

please read

"How does the PowerFC compare with the Apexi SAFC, AVCR and other Apexi computers?"

http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#18

and

"Apexi SAFC vs Apexi PowerFC, whats the difference?"

http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#58

the first section at the top titled unit information has every question you could think of

http://paulr33.skylinesaustralia.com/docs/...powerfc-faq.htm

PowerFC = full replacement computer

SAFC = p!ggyback computer that works with standard computer

If all you want is to tune your air/fuel ratio to a safe level, the Apexi SAFC will suit your needs...

I'd recommend paying the extra for a full replacement computer, such as a PowerFC ;) It gives much more tuning ability.

PowerFC = full replacement computer

SAFC = p!ggyback computer that works with standard computer

If all you want is to tune your air/fuel ratio to a safe level, the Apexi SAFC will suit your needs...

I'd recommend paying the extra for a full replacement computer, such as a PowerFC ;) It gives much more tuning ability.

As would I :cool:

If I run the Power FC, is the standard computer still plugged in too?

P.S. Don't laugh.....

No Power FC replaces the factory ecu.

If you don't plan on upgrading your turbo or other significant modifications, the SAFC will suit you fine. Tuning is cheap too.

No Power FC replaces the factory ecu.

If you don't plan on upgrading your turbo or other significant modifications, the SAFC will suit you fine. Tuning is cheap too.

So what runs the gearbox and all the other parts in the car if the standard ECU isn't used?

A manual transmission has no electronic control. AT have there own independant system.

Power FC's are designed for manual transmission cars as there is a bit of trickery involved with the way an AT cars ecu behaves during shifts

The Power FC is a drop in replacement and retains factory functionality.

As other people have mentioned- nistune is a good way to go. Cheaper than power FC and uses the standard ECU with a p1ggyback board (Programmable EEPROM) to change fuel maps and ignition timing.

Beware that when you start considering something like nistune or power fc, tuning is expensive ~$600+

If you plan on keeping your neo relatively stock ~190rwkw go the SAFC, otherwise nistune it

Edited by lukebaldan
A manual transmission has no electronic control. AT have there own independant system.

Power FC's are designed for manual transmission cars as there is a bit of trickery involved with the way an AT cars ecu behaves during shifts

The Power FC is a drop in replacement and retains factory functionality

Ahhhh k, I see.........

Since mines an auto, what's the best option for me?

I've got a hi-stall too so I don't want it not shift properly.... ;)

Ahhhh k, I see.........

Since mines an auto, what's the best option for me?

I've got a hi-stall too so I don't want it not shift properly.... ;)

Not sure how nistune copes with autos (Someone please confirm)

Definately takes the power fc out of the question

As i said:

-If you plan on keeping your car relatively stock (Boost, exhaust, intake) the SAFC is good cheap upgrade

-If you are chasing more performance (Upgrade turbo, etc.) Then the nistune will give you the best gains and future flexibility

Edited by lukebaldan

Thanks for telling me about this Nistune....

I guess a lot of peeps have this kind of issue.

All I want is my car to be street reliable, I've

got a bigger turbo, running some boost and a 2.2 hi-stall.....

It goes well now but I guess this is the next/last step.....

Just looking through the forums and it seems a few people with autos have installed nistune with a high degree of success.

I would make 100% that it is safe, you don't want to put unnecessary load on your auto.

The fact that you have a bigger turbo and are planning on a few mods suggests that the nistune option is a winner provided you won't have issues with your auto

Adam, R33 are not compatible with NisTune without going to a Z32 ECU... R34 and R32 are.

Nistune fitted and Tuned at Status is 750 going by what Trent said in a thread, best to call him and confirm, as prices could of changed.

Second hand SAFC 2 is what? 250, + wiring + tuning assuming 500ish for install and tune, then it is easily defected, where a NisTune isn't... Things starting to look a little different now?

SAFC: bends AFR's on a few points.

NisTune: AFR's, timing, limits etc can all be adjusted.

http://www.statustuning.com/

Also I think Chasers, Springy Motors etc do NisTune

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • Got the front subframe and suspension in.    
    • If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...