Jump to content
SAU Community

Recommended Posts

hi guys im having a poblem with my S2 attessa 4wd system ,

i have just fitted 2 second hand tyres one on the front pass and

the other on the drivers rear . both tyres have 50% tread and

all 4 tyres are the same size 245/35/19 . now when i drive the car

the 4wd system is coming on under normal driving conditions

front torque gauge reads anywere between 5 kg/m - 10 kg/m

and the car feels as if it is surging . im thinking that maybe because

the tyres are actualy slightly a diffrent rolling dia so therefore the

attessa system sensors are telling it that one of the wheels are spinning

enough to engage the 4wd . im just wondering if anyone has come across

this problem before ??????, there was nothing wrong at all with the car

before the 2 tyres were fitted , and no one touched the car at all while the

tyres were fitted and the guys who fitted didnt break or damage anything

because i watched him like a hawk like i do with anyone who works on my stag

HAHAHA :D;):wacko::D any help will be very much apprciated thanks guys and girls ....

Link to comment
https://www.sau.com.au/forums/topic/297204-s2-4wd-problem/
Share on other sites

Dude the diff rolling diameter is defs the prob. As a side not I noticed that the 4wd was kicking in more ofter with just lower tyre pressure (I know of others that this has happened to).

Also as kidafa said dont mix n match tyres from side to side on each axle. Not just for safety reasons but u can damage diffs etc by putting diff size tyres on the one axle.

Link to comment
https://www.sau.com.au/forums/topic/297204-s2-4wd-problem/#findComment-4950184
Share on other sites

And risk damage to the 4wd system? Good advice!

plesae tell me how it is going to damage it ? the rear wheels wont be turning faster than the front so it wont send any drive to the front . and the overall difference wont be any greater than the difference between wheel speeds when driving around a corner. i put the space saver on the rear of mine and it was a flamin mongrel . sent like ten% to the front . unplugged the green wire and it was happy as

Link to comment
https://www.sau.com.au/forums/topic/297204-s2-4wd-problem/#findComment-4951837
Share on other sites

thanks guys fo your help in conferming what i thought was the problem. i have changed the tyre that was the problem and it has fixed it . but i have booked the car in for 4 new tyres next week so my problem is now ALL GOOD thanks again eveyone who helped out !!!!

Link to comment
https://www.sau.com.au/forums/topic/297204-s2-4wd-problem/#findComment-4956136
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...