Jump to content
SAU Community

Recommended Posts

hey guys,

i bought my gtr about 3 weeks ago and when i bought the car i was told it was running

n1 turbos, but the owner had no prove of then so i just assumed they were standard

(besides being quite laggy) until i put it on the dyno and realised it is very laggy,

does anyone else have this much lag on standard turbos???

or can any help comfirm there n1 turbos???

im new to gtrs but have spent alot of time around turbo cars

thanks

post-67632-1258880567_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/297285-r32-gtr-n1-turbos/
Share on other sites

it running factory boost which is 7.5pd or very close to that, it basicly stock beside a full exhuast

im more interested why it is so laggy???

i would love to see another r32 gtr with n1 s dyno chart just to see when it comes on?? anyone got one??

i have searched it but with no the results im after

yeah that ramp rate is about right for r32 n1 turbos, I make full boost around 4500. You are not running enough boost though only 7psi. even standard is 12psi and the turbs are fine up to say 20psi.

and what is with hp? haven't queensland gone metric yet? I thought all of australia except WA had moved off the imperial system

thanks thats the info i wanted to hear

what sort of power should i see with 16-18pd??

so no chance of being standards ?

im just scared of running 16-18 and the rear turbo wheels letting go

not sure why its not metric

thanks russell

thanks thats the info i wanted to hear

what sort of power should i see with 16-18pd??

so no chance of being standards ?

im just scared of running 16-18 and the rear turbo wheels letting go

not sure why its not metric

thanks russell

I have the R32 Nismo trbos, and this curve looks about like my 2nd gear pull. I have seen .6 bar as low as 3800rpm in 4th gear and 5th gear. Turn up the boost and get them in their effienency range, around one bar. Be careful though, stock injectors cant support 1bar from these turbos, neither the stock MAFs as well.

I wouldn't know if that was right or wrong. It has a pfc, super drager, 700 and sumthing injectors, apexi intake and I think some other bits and pieces. It may have been awkw? The guy that sold it to me took it to the dyno (Todd at top of page) so I dont know the details.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...