Jump to content
SAU Community

Hella Tight M35

Chasey

By Chasey,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Chasey Apprentice

Chasey

Posted
  • Author
Posted (edited)
looks the good champ

exactly the same kit as mine

aero plus the wing!

with the rims. did you have any other issues at all? cleared the brakes fine etc?

trying to find some low offset rims myself atm im just going the space out the ones i have now thou:D

im running 15mm bolt on spacers... but pretty sure the rims clear the calipers any way, just need to get a gaurd roller on the gaurds to make some room

Edited by Chasey
japmatic Explorer

japmatic

Posted
Posted

WOW mate! She just gets better and better!

I have been in NZ for 3 weeks and am AMAZED at the amount of M35s I have seen! Where abouts are you? I was staying at my sisters in Remuera in Auckland. Now on the South Island.

Chasey Apprentice

Chasey

Posted
  • Author
Posted
WOW mate! She just gets better and better!

I have been in NZ for 3 weeks and am AMAZED at the amount of M35s I have seen! Where abouts are you? I was staying at my sisters in Remuera in Auckland. Now on the South Island.

im in hamilton which is about 90mins south of auckland, M35's are cheap as chips here.... can pick a standy non turbo one up for $7000

Blade NZ Enthusiast

Blade NZ

Posted
Posted

Hey Chasey sweet looking ride. I'm looking for an Aero front bar, they really suit the M35 and yours just sealed it for me.

And yeah there are heaps of M35's around now, prices are good and they're alot of car.

Auckland prices range from about 8k at the bottom (high km) to about 16k for low km top of range. Even a few 3.5's available now.

  • 6 months later...
Sidius Collaborator

Sidius

Posted
Posted

Hey guys, im new to the forum but thought id post up some pics of my RS4 turbo M35. Im in NZ but running euro plates.

Running 19x10 AME rims at +5 offset, silk road coil overs, raiser exhaust.

X-member sits at 38mm from the ground.... suspension can go lower but as you can see its hard for the body to drop any more, also top arms hit on the body at this height.

picture163m.jpg

picture161w.jpg

picture165f.jpg

picture169d.jpg

picture174j.jpg

how is the car on 10inch wide mags dont u get rubing and can u do a ful steering whell lock ?

  • 2 weeks later...
SMOKEYV35 Mentor

SMOKEYV35

Posted
Posted

i like the look of it, but sheesh, 38mm to the x/member - has to be borderline undriveable......

might have to start looking at some bash plates to protect any important bits. if you're on stancenation i'm sure you would have seen all the images of oil pans that have scraped through!

i used to think i was bad a$$ with 60mm of clearance on my LS400.....got sick of not being able to drive it anywhere and the sound of UCA's trying to punch out of the strut towers tho...i must be getting old huh.....

  • 2 weeks later...
Chasey Apprentice

Chasey

Posted
  • Author
Posted

i like the look of it, but sheesh, 38mm to the x/member - has to be borderline undriveable......

might have to start looking at some bash plates to protect any important bits. if you're on stancenation i'm sure you would have seen all the images of oil pans that have scraped through!

i used to think i was bad a$$ with 60mm of clearance on my LS400.....got sick of not being able to drive it anywhere and the sound of UCA's trying to punch out of the strut towers tho...i must be getting old huh.....

nah the sump is all tucked up... the only part that touches the road at times is the engine X member... i drive this thing every day like this, clocked up about 25,000km at this height. just get to know what roads you can go down and which ones to avoid.

Ive moved to gold coast now but still have the stagea back in NZ if any one is keen to buy it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • perry_r33
      Skyline R33 Sedan Tail Lights S2 - (2 SETS Available) Silver & Grey

      By perry_r33 · Posted

      Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • GTSBoy
      First time Skyline owner

      By GTSBoy · Posted

      Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...