Jump to content
SAU Community

Recommended Posts

i never get to drive the stagea like it should as i have a missus stapled to the passenger seat 99% of the time.

yesterday she had a lift home with a friend so i wound down the windows and have it a couple of full throttle runs .

it works fine and goes like a rocket after the new exhaust has been put on a month ago (3 inch front pipe, the highest flowing cat i could find and a fujitsubo cat back 3 inch)

but i noticed everytime at 5500 to 6000 it hesitates for a second then keeps on going to redline where the auto shifts, the exhaust makes the nicest craclke and pop sound while engaging second and continues strong in the next gear.

only noticed it recently and if it is on 50-80% throttle it wont do it - only at near or full throtle.

drives beautifully none the less, just curious to the cause

the exhaust stuffed things up?

sign of something on the way out?

Link to comment
https://www.sau.com.au/forums/topic/297804-hesitation-at-6000-rpm/
Share on other sites

Exhaust won't be doing any harm but you may have noticed an increase in boost. Do you know what state your plugs are in? A new set of coppers might fix the problem. Ideally your next mod should be some means of tuning the engine.

in all honesty i have not ever changed the plugz :blink:

i aim once i get back to adelaide (see long trip in stagea thread) and doing an new waterpump, plugs and cam belt as i have tools, mates, second car and plenty of places to get parts from

once i get back i'll swap in some newies and retry - this is the extent of all planned modifications, goes fast enough and reliability is the top priority, not power.

Completey normal for a RB25, mine also does it and so I know a few other people with the same thing. The VVT changeover is at about 5000rpm so we're probably experiencing the increase in torque from the high rpm lobe. At first I thought it could be a tuning issue with the stock ecu running too rich, but I've pulled my mixtures back to an acceptable afr and still feel the torque increase around 5500-6000rpm.

I think you'll find if you look at some dyno sheets of RB25's running stock VVT cams and control points you would see this flat spot on the torque curve.

i'm guessing it is just more noticeable in a lower gear and without the backpressure of the old standard exhaust dampening its effects.

its hard to test it in 2nd and third gear safely for obvious reasons, and its likely i'll never do it again for another 3 months...

just had me a bit worried thats all

thanks

post-41987-1254741825_thumb.jpg

^^^ exact same engine with lesser an exhaust

it is pretty obvious the dip in performance which matches what i feel, almost looses power before making more.

some with bigger injectors, powerfc and exhaust cams have overcome this

not for me but looks common although i'll never go that far.

Coilpacks, well could be - it happend at the exact same rev range though, thought arcing packs woild be a bit more sporadic.

Edited by 910trx

Hey i had a series 2 RS4 stagea with RB25det engine... had the same problem, i went through every thing, coil packs, spark plugs, air flow meter. i couldnt work out what was wrong till about 4 months later it got worse and worse, turned out it was the fuel pump. put a new fuel pump in it and it went great

^^ your pic's a bit small mate.

doesn't the neo have Continuous Variable cam Timing, as opposed to some form of variable timing??? there shouldn't be an overlap at all (in theory) with cvt??

edit:

i've also noticed since putting a boost gauge in the girl's stag, the (stupid) dual stage boost doesn't work too great. in the second stage it spikes to 7 and then bleeds back out to 5 again :S

Edited by pyro-ns
yeah i know its small - but seems irrelevant now

whats a good pump worth these days?

Just put a 2nd hand one in... should set you back around $100.... or i think you could get a walbro for around $250 new.

it will only be one of these 3 things thats wrong, coil packs, spark plugs or fuel pump. see if you can borrow some one elses parts to check what is wrong

i'll wait untill i get back and start doing the things that i know it needs and the cheapest first

so probably plugs, pump, then packs

thanks guys really appreciate it

i'm still clueless when it comes to efi turbo - throw me a carby and i'm fine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...