Jump to content
SAU Community

Recommended Posts

Hey fellas, I did search, but failed to find the answer.

I have a 32 GTS-t with GTR front gaurds.

Rear gaurds are rolled.

Will R34 GTR wheels suit without major rubbing? Car is a tarmac rally thing so not overly stiff or low. Camber is only average, 2.5 front, 2 rear.

If they do, do you think they'll still fit with 265/35/18 rubber?

Am I correct in thinking R34 GTR wheels at +30mm?

Sorry for the nube question, I feel I used to know the answers but I'm getting old and definately drink far too much! :bunny:

Link to comment
https://www.sau.com.au/forums/topic/297863-r34-gtr-wheels-onto-r32-gts-t/
Share on other sites

i'm running 17x9+30 235/45/17 KU36's

-2 front, -1.2 rear

lightly rolled guards

345mm eyebrow all round

6kg front, 5kg rear

diameter will be 1mm less, width will be 30mm more.

you will be running more camber, and more of a rear guard roll than me, should be fine, fronts, should be fine, want me to check inner clearance for you? what height will you be running?

Troy might be your man.

My mechanic ran 34GTR rims, no issues on a 32GTR, so I assume with rear guard work and your front gtr guards you should be fine.

how come you are running 18's, and a 265 on a 9?

why not 33GTR rims with a 235?

Thank you kindly Ryan!

I actually have Troy's old WEDS 17" wheels on it now, but I can get velly chip 265/3518 Yoki A050's, hence the experiment.

If you can check inner clearence when you have a minute that'd be great! Heights on mine tend to vary, whether it's circuit racing or rallying, moves over a 25mm range.

My rear gaurds are only lipped, not rolled as such. I've emailed Troy to see what the "guru" has to say :bunny:

Thanks again!

They will fit fairly easily, even with that much tyre.

front will have a sunken battle ship look, rear will probably need a slight touch with a guard roller to clear the rubber.

My only concern on the front would be clearance to the suspension, but as there's so much room to play with due to the guards you could easily space them out.

I have 17x9 +25's with 235/45-17 re55's which sit square on the rim on the front of mine in this photo, heaps of clearance

2559918189_98fa286ac9_o.jpg

Cheers Dave! If it does have inner clearance issue in the front I'll use a 20mm bolt on spacer. I used the same on my old 32 GTR on the front and found it turned in much nicer.

Just on the hunt for some 34 wheels now :)

Do you guys think it's a ceertain that they won't fit using the original gts front gaurds?

I'm running 245/40/17 on 33 GTR rims. Comes damn close to suspension (Less than 3mm). I won't go wider. 265's will almost definitely rub on the inside unless you run spacers and then pump guards (or fit GTR guards). If they do fit and then run the AO50's it'll be freiken awesome.

34 and 33 gtr wheels are +30. Only diff is 18 vs 17 inch. Tyre profile will make outside diameter similarish...

With gtr front guards you won't have a problem with outside. Only inside problems with 265's. Spacer would fix this if you're happy to run them.

Rears shoud be fine on inside, may need to pump the guards a bit to fit that rubber.

Heck, with cheap AO50 semi's it'll be worth a try and spacers to make em work!!!

From what Russ said only reason I am not as close to rubbing is either my camber or 235's...

Check your clearance with 235's. It's prob about 5-7mm away from the suspension arm. That's a decent gap.

Also camber will not change how close it is to that suspension arm. It follows the tilt of the wheel with camber coz the upper control arm adjustment for camber is above that.

34 and 33 gtr wheels are +30. Only diff is 18 vs 17 inch. Tyre profile will make outside diameter similarish...

With gtr front guards you won't have a problem with outside. Only inside problems with 265's. Spacer would fix this if you're happy to run them.

Rears shoud be fine on inside, may need to pump the guards a bit to fit that rubber.

Heck, with cheap AO50 semi's it'll be worth a try and spacers to make em work!!!

Check your clearance with 235's. It's prob about 5-7mm away from the suspension arm. That's a decent gap.

Also camber will not change how close it is to that suspension arm. It follows the tilt of the wheel with camber coz the upper control arm adjustment for camber is above that.

wasn't sure what part of suspension you meant yours was close too, thanks for clarifying, profile will be pretty much the same, i checked on a tyre size calc.

^^ WTF are you smoking Roy? lol

Here they are, as yet with the GTR front gaurds fitted that I bought for it;

11468_102362446454898_1000004342972.jpg

With rolled edges the rubbing is very minimal, only one side at the front needs a bit more of a roll. They look awesome. Track time next Sunday we'll know for certain.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...