Jump to content
SAU Community

Recommended Posts

Someone's been searching themselves. :banana:

Actually at that price on the 5970 I could buy one and resell it here as second hand and still make $200. But nah the distributors aren't gouging at all.

Edited by DivHunter
  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

Someone's been searching themselves. :P

Actually at that price on the 5970 I could buy one and resell it here as second hand and still make $200. But nah the distributors aren't gouging at all.

We're just trying to get to know the community. Also, we sell rims because we are an automotive store too :) . We carry various automotive brands like HKS, Neuspeed, ABD Racing, and etc. Currently we are working on adding all the car parts to site, but it takes some time :banana: .

Edited by TilaTech
We're just trying to get to know the community. Also, we sell rims because we are an automotive store too :down: . We carry various automotive brands like HKS, Neuspeed, ABD Racing, and etc. Currently we are working on adding all the car parts to site, but it takes some time :P .

Welcome but remember - no business advertising unless you are a paying trader.

And unfortunately, we only accept Aus businesses.

Ahahah that's hardly a fkn welcome then! :P srs, wtf is he supposed to do?

No point anyway, the only person here dumb enough to buy a card that costly was me, and my gear was already bought and paid for when I started talking in this thread...

plus that card is still like 11 feet long.. and still no waterblocks.

We're just trying to get to know the community. Also, we sell rims because we are an automotive store too :down: . We carry various automotive brands like HKS, Neuspeed, ABD Racing, and etc. Currently we are working on adding all the car parts to site, but it takes some time :P .

Yeah that was wierd, I bought from the old site and then there were wheels. There aren't too many US retailers that will ship direct to Aus. I will PM you with other places you should be and you will reward me with free stuff because I like free stuff and occasionally think about my BloodRage that went in the bin and shed a single tear.

Ahahah that's hardly a fkn welcome then! :P srs, wtf is he supposed to do?

No point anyway, the only person here dumb enough to buy a card that costly was me, and my gear was already bought and paid for when I started talking in this thread...

plus that card is still like 11 feet long.. and still no waterblocks.

Hmm, perhaps Australian water cooling shops are a bit behind. We have Koolance 5970 blocks, EK 5970 blocks, and soon some XSPC blocks (have to add those to the site too :down: ).

To DivHunter: can't reply yet to PM's, thanks though for the suggestions. Quite a shame that the Bloodrage went into the bin. Very nice visual aesthetics and it is a great setup if you want to only use 12GB ram. Our test rigs use 6GB ram because it provides a very nice stable overclock and is still more than enough for the majority of 64 bit applications.

Edited by TilaTech
  • 2 weeks later...

ok, almost crunch time and i haven't been chasing this up anywhere near enough.

Decided to go with i7 920 as i'm happy to pay extra because my budget is now around $2000 - $2200

so if i go i7 920, i take that these are the only mobo's i can choose from?

G-B EX58-UD3R or EX58-UD5

ASUS P6T or P6T-Deluxe

If so, that kinda makes things easier as i don't have to think about a zillion options.

So going from msy prices it's..

i7 920 = $359

mobo = ~$350

If i get one of the above mobo's, does that mean i should really get DDR3 ram? Or i should just buy that anyway?

RAM = ~$180 for 6GB (DDR3 1600)

I like the idea of SSD's, should i get 1 or 2?

SSD = ~$150 for 64GB (msy says 2.5" internal notebook though)

HDD = ~ $140 for 1TB

So far we're at $1170, roughly. Still need..

-Graphics Card

-Case

-Power Supply

How much for a good graphics card if i'm not gaming?

Which cases should i look at to house all this? Don't want clear windows or any of that stuff.

Never know, might be able to fit a workstation card in there :P budget has grown since original post.

Or i could get this

http://www.boxxtech.com/products/cf_step2....tal=UpdateTotal

:blink:

i7920

UD3R if budget it tight, UD5 if not. Compare on the gigabyte website for differences, not major.

DDR3 - Mobo won't run anything but DDR3

SSD - Yes, you need a 2.5 one that is NOT notebook, then adaptor to put it into a case

Case - http://www.pccasegear.com/index.php?main_p...oducts_id=11226

or http://www.pccasegear.com/index.php?main_p...roducts_id=3770 (i used this recently in a friends build i did, nice and cheap and super quiet)

so -$170

Leaves $1000 left.

GPU - HD5870 - $550

PSU - Corsair HX650 - $180

Perhaps someone else might be able to reccomend a workstation card 550-700 as you have that to spend. Im not really up with that area or if they are better than current run of the mill ati/nvidia offerings

you mentioned you werent gaming,

31 nismoids selection on a graphics card is 'sumptous' sorry only word i could think of, I sooooooo want one, its an amazing card BUT if you arent into gaming you could prob save $100 - $200 and get the next one down the 5850 or even the 5770. both still nice cards and should do some nice things for you.

The money you save on that you could then prob go a step up in some of the motherboards 31nismoid suggested.

had a bit of a read over at cgsociety.org and the general consensus is that even an 'OK'/mid level gamer card will do just fine for 3D work. Unless i get a workstation card (which again, from reading over there don't seem to even make a huge difference now with the some of the high end gaming cards on offer) i probably could save some money on the graphics card, and maybe get more RAM.

There's talk of graphics cards being able to do real time rendering soon, but it's not really available yet, so until that happens, maybe i should just go for a middle of the road graphics card and maybe go 12gb ram instead of 6gb?

That case that you said is super quiet sounds like the ticket. I take it it doesn't have the blue lights unless you put them in yourself?

So i take it a 'mid tower' type case is going to suffice?

You wont need more than 6GB of ram surely?

The cheaper case does have faint blue LED lighting. It's not super bright.

The Lian case from what i gather doesnt have LED's if that is what you want.

mid tower case is fine, yes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...