Jump to content
SAU Community

Do You Get More Attention With Your Wider Wheels? 9-10 Inch

kyekye
 Share

Recommended Posts

kyekye Enthusiast

kyekye

Posted
Posted

Hi guys,

Bought some 18" rims for my r32 a while ago, 8.5 front and 9.5 rear. The rears stick out a bit which I like the look of but the tyre shop has got me second guessing whether to put them on. I didn't realise that it's unroadworthy for wheels to stick out. So wondering what sort of attention if any, you guys get. Everything else is stock and I don't hoon or drive crazy, just to work and stuff.

Am I just being vein by putting them on and risking it?

Thanks

Kye

alr33x Grand Master

alr33x

Posted
Posted

what tyres u running? sticking out will get you attention and if you have stretched tyres be warned it wont end well! its the tyre shops job to tell you its not roadworthy.

having said that ive got 18x10 sticks out a fair bit they were far more worried about stretched tyre, perhaps roll your guards? how much is it sticking out, post pics 9.5" should be too bad really.

NZM.031 Grand Master

NZM.031

Posted
Posted

aslong as the top of the tyre is inside the guard, they dont really hassle you.. their problem is that if you run over or hit someone and they roll down the side and hit the top of the tyre they can be sucked/pushed under the car.. so whether its alot of neg camber, stretched tyres, or flared/pumped guards.. you shouldnt need to worry much.. just dont be caught doing anything silly eh?

if you see the big 4wds with their chunky as tyres sticking 3 inches out of the guards you can understand why... if you rolled down the guard off the bonnet the tyre would catch you and drag you down instead of bouncing off and hitting the road..

i usually run 235's on a 9.5 inch rim and this is within the tyre size range for this size wheel.. only just though.. so i just figured there wasnt really anything that they could do and ran with that.

dont be fooled into thinking that its highly illegal and a death trap... this just isnt the case.. soo many people on here run stretched tyres and most sit out of the guards a little, and i never heard any of them complaining of being dead.

thewheeldeal.com.au Apprentice

thewheeldeal.com.au

Posted
Posted
if you see the big 4wds with their chunky as tyres sticking 3 inches out of the guards you can understand why... if you rolled down the guard off the bonnet the tyre would catch you and drag you down instead of bouncing off and hitting the road..

There's that... and also the problem of picking up road debris (stones etc) and projecting them forward from the top of the tyre into oncoming traffic.

kyekye Enthusiast

kyekye

Posted
  • Author
Posted

The rears only stick out about 2cm and should fit nicely under the guards with 245/40 tyres. (Wheels came with 275/40 and b-u-l-g-e)

From what I've researched the 245/40's are a good size. I do actually want some performance and am not just putting them on to be fully sik.

I might try a different shop and get them to put the new tyres on but I'll put the wheels on the car myself. Last tyre shop made me feel stupid and asked me if I had even tried them on the car. Meh, maybe I'm just being too sensitive.

Thanks for the input

scathing Grand Master

scathing

Posted
Posted
Bought some 18" rims for my r32 a while ago, 8.5 front and 9.5 rear. The rears stick out a bit which I like the look of but the tyre shop has got me second guessing whether to put them on.

Got any pics? How far out are they sticking? If they're flush you'll generally get away with it, unless the cop is having a bad day or knows that there's more to the wheel modification restrictions than diameter.

I didn't realise that it's unroadworthy for wheels to stick out.

Did you realise that it is also unroadworthy to have the wheels 1" wider than the widest stock wheel without an engineering certificate? Or offsets 13mm lower than the stock wheels? Some of the more clued-in cops check these numbers too.

what tyres u running? sticking out will get you attention and if you have stretched tyres be warned it wont end well! its the tyre shops job to tell you its not roadworthy.

Yeah, but most of them are idiots. I've seen plenty of tyre shops recommend illegal wheels to people.

scathing Grand Master

scathing

Posted
Posted

The legality for an aftermarket tyre is based on the size of the OEM one, not the wheel you're fitting it to.

Tyre manufacturers have recommendations for what sized wheels you should fit certain width tyres onto, but these vary from tyre to tyre.

alr33x Grand Master

alr33x

Posted
Posted
The legality for an aftermarket tyre is based on the size of the OEM one, not the wheel you're fitting it to.

Tyre manufacturers have recommendations for what sized wheels you should fit certain width tyres onto, but these vary from tyre to tyre.

yes but my question was what is the recommended tyre for a 10" rim not whether a 10" rim was legal for my car or not.

i just want to know is a 255 within recommendations or is it 265s etc. :blink:

_Ryan_ Grand Master

_Ryan_

Posted
Posted
yes but my question was what is the recommended tyre for a 10" rim not whether a 10" rim was legal for my car or not.

i just want to know is a 255 within recommendations or is it 265s etc. :blink:

235/45 on my 9", but the rims protector doesn't quite protect it due to angle, not a stretched fitment by any means.

so 25mm wider rim, 25mm tyre? = 260mm, I would probably go the 265, 255 would end up starting to look stretched IMO, but that is a guess and there would be better people to comment.

In the tyres I use I wouldn't have a choice, KU36 on a 17x10 I would have a 255, as these are the choices:(from kumho website) 18x10 they would have a 265 not a 255

245/40 R17

255/40 R17

275/40 R17

245/35 R18 XL

265/35 R18 XL

275/35 R18 XL

So you might want to check what sizes are available if you are set on a specific tyre.

thewheeldeal.com.au Apprentice

thewheeldeal.com.au

Posted
Posted
yes but my question was what is the recommended tyre for a 10" rim not whether a 10" rim was legal for my car or not.

i just want to know is a 255 within recommendations or is it 265s etc. :blink:

your 235/40R18 is 645mmOD

10" options

255/40R18 is 661mmOD

255/35R18 is 636mmOD

265/35R18 is 643mmOD

scathing Grand Master

scathing

Posted
Posted
yes but my question was what is the recommended tyre for a 10" rim not whether a 10" rim was legal for my car or not.

ORLY?

wheeldeal can u tell me where u get ur wheel guidlines? i need to know for 10" rim what tyre is legal.

Care to try again?

I never said that you were asking whether a 10" rim was legal or not. Your question was about what kind of tyre is legal for your car. My response was that the legality of the tyre you choose is primarily dependent on the stock tyre, not the wheel its going on.

alr33x Grand Master

alr33x

Posted
Posted
ORLY?

Care to try again?

I never said that you were asking whether a 10" rim was legal or not. Your question was about what kind of tyre is legal for your car. My response was that the legality of the tyre you choose is primarily dependent on the stock tyre, not the wheel its going on.

perhaps comprehension is not a strength of yours.

my question purely related to a 10" rim and what is the suitable tyre for this i didnt ask about the legality of the rim on the car. regardless of the car the tyre must be within the guidlines for that size rim unless im wrong?

k thanks bye.

Rbryan & wheeldeal thanks for your help

kyekye Enthusiast

kyekye

Posted
  • Author
Posted (edited)

post-61036-1259991744_thumb.jpgpost-61036-1259991757_thumb.jpg

post-61036-1259991768_thumb.jpgpost-61036-1259991711_thumb.jpg

The rears have 275/40s on in the photos but will be changing to 245/40s. Better fit under the guards and better handling I think?

Edited by kyekye

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Why are people so insistent on making dirty water?!
    • Dose Pipe Sutututu
      Duncan's V37.......race car?

      By Dose Pipe Sutututu · Posted

      Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...