Jump to content
SAU Community

Recommended Posts

Hi Guys ,

got my pride and joy for sale im moving on looking at buying something different , alot of time and money has been put into this car . i am the second owner of this car in australia car was originally purchased from trusted car yard Fuji Motorsports who have a great reputation with cars they bring

Details :

Late 2000 model R34 GTR In Silver ( FLYT34 )

Rego is up in March

49,000 Km's On Nismo 330km Aftermarket Dash , Original Dash had 20,000 km's on it

Clear nismo front and side indicators

Nismo Gear Knob

Factory V SPEC 2 Interior in black stitch , yes the interior we all love ( car came like this from factory )

Alpine Cd Player With Pioneer speakers

Rhino Alarm System ( RES4601A )

Blitz Spec R Electronic Boost Controller

Tints are 15% all around

Hidden Kill Switch

Full Z Tune Body Kit , Includes Front Bar, Side Skirts , Rear Pods , Carbon Fibre Bonnet , carbon fibre lower lip

Ganador Carbon Fibre Mirror , carbon fibre exsaust shroud

Wheels Are the famous and rare Nismo LMGT4's In Bronze Wrapped With one of the best tyres you can buy Brand New Bridgestone Adrenalin Tyres 275/35R18's 95W ( These alone cost me $500 per tyre )

Car is lowered with D4 Coilovers extremely good for street use

Standard Brembo Brakes But have just fitted brand new brake pads 1520 Bendix Brake Pads for front and rear

Engine Modifications Include , Most of these mods have only been done recently ,Apexi Power FC Genuine HKS 25/30's ( only 10,000kms driven on them ) with hks actuators , HKS Dump pipes , Full 4 inch Custom Race Exsaust no cat etc . with varex electronic silencer , Tomei Adjustable Cam Gears , Tomei Pon cam Type B 260/260/9.15 Lift ( very lumpy cams ) , Bosch Z32 Air flow metres , Tomei Z32 Air flow meter adaptor plug , ARP Head Studs ,New Valve Springs , Tomei Metal Gasket Kit ( Head gasket , intake manifold gasket , exsaust manifold gasket , Throttle body gaskets , Nismo 600cc Injectors , Bosch 044 fuel Pump , Exedy Hyper Twin Plate Clutch , Brand New Century Battery , Blitz Radiator Cap

Car also just had a major service done including , Gates timing belt , water pump , crackshaft front seal , camshaft seal etc. this car gets a service every 3,000km's i changed everything spark plugs , oil , oil filter , diff oils , brake fluid etc .

All engine work And dyno Tuning was done trusted workshops powertune and croydon racing developments , i have lost count how much money i have put into this car i have gone over 30k i know that . car has never been raced at all on the track and is always run on maximum 18psi , will definately run a low 11 and should run a high 10 with more boost and bigger injectors , Car Made 340kw's on 18psi at the 4's but has plenty more in it but injectors maxed out , i have denso sard 700cc injectors ready to go in a push some more power out of this beast, this car is EXTREMELY quick on the street comes on boost early and just does not want to stop , i also have all the original parts , bonnet , mirrors , spare set of side skirts rear pods , brake pads , standard exsaust which i will chuck in to the buyer . i am very very fussy with my cars interior and exterior is imaculate

i have not changed a thing on the engine bay physically mainly for cops and epa , if you open up the engine bay your looking at a standard gtr so you got no problems with cops .

i am sure i have missed out on some things but i will update if i have to , pictures are below if you need more shoot me a pm i got heaps

Price is $56,000 Or Nearest Offer , car has cost me almost $100,000 , strictly no joy riders or tyre kickers this is a serious gtr test drives only for serious buyers , Please send PM'S as i do not log in here as often . Please PM Me if you after a swap i may consider certain cars only

thank you for reading

post-39500-1260100497_thumb.jpg

post-39500-1260100518_thumb.jpg

Edited by MRGTR911
Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

People this car is a perfect example of a GT-R...

I know that the car was built to perfection and the owner is an extremely fussy guy.

As a fellow enthausist I know this car will not disappoint..

A bargin at $56,000.

Wow didn't think it would be advertised that cheap..

I know that this car will sell quickly as the pictures don't justify it.

Looks better in real life and sounds unbelievable.

Good luck with the sale....

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4974117
Share on other sites

Thanks so much for the kind words , definately well priced i dont want to price it 70k and wait 10 years to sell it thats all

extra parts worth mentioning , Brand New Spiltfire Coil Packs ,

Carbon Fibre Door Pillars on the side

like i said if more picx needed please pm me i have plenty

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4975287
Share on other sites

Justin - yes base model GTR , I Have previously owned a 99 model v- spec and honestly i could not tell the difference besides rear diffuser and mfd display , other then that drives the same

Billy - you got the wrong guy mate i think your talking about my brothers evo , you never had a chance with me ehehe ( hows your motor going by the way , blew up that day didnt it , overboost ehehe ) talk soon mate ...

Kietz - open up a r34 engine bay , standard one that is it will look exactly the same , for some weird reason i cant upload any more picx .

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4975544
Share on other sites

Free Bump Buddy one of the best GTR's iv seen definitely worth every dollar cheap sale price aswell! apparently only 20 of these where ever made.

It's not a Z Tune mate. Still a very nice car I might add, and priced very well.

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4978127
Share on other sites

more picx

see attachments

http://i575.photobucket.com/albums/ss200/s...9494_resize.jpg

http://i575.photobucket.com/albums/ss200/s...9504_resize.jpg

http://i575.photobucket.com/albums/ss200/s...zebordersig.jpg

thanks again for all the kind words ,

gohan - kit is not the real deal , made from quality fibre glass though ,

all pm's replied .

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4979290
Share on other sites

Mate, are you interested in a swap with cash your way? I have a R33 GTR VSpec with genuine 400R front bar and sideskirts. Car making very good power to rival what you have. I recently bought it but now have a fetish for a R34 GTR. Please tell me if you're interested asap before I lose my erection! LOL

Link to comment
https://www.sau.com.au/forums/topic/299144-r34-gtr/#findComment-4979486
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...