Jump to content
SAU Community

Recommended Posts

For some time now I have been considering buying a daily car to cruise around, and the V35 350GT-8 filled my criteria and budget. I am aware of the gearbox expenses associated with the CVT models. Unfortunately this has only made me wary so I'm now after another issue that might knock it out of my "daily shitbox" list :)

What I am after is the standard ride height of the car... if possible in comparison to a standard R33 (what I currently have :) ) Reason being my R33 is all well and good at the moment but I imagine the days where I would drive along a dirt road in the bush without a second thought are coming to an end :D

So please post up figures, experiences bottoming out, stories about smashing front bars or how I am a retard for choosing a V35 4 door :D

Link to comment
https://www.sau.com.au/forums/topic/299485-v35-sedan-ride-hight/
Share on other sites

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

Re: ride height, I have no idea.

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

If you can't afford the auto or manual then you shouldn't consider the cvt either... I think a new cvt is in the order of $17000 and noone in Australia specializes in fixing this particular xtroid one.. cvt failures are more common than you might like to believe.. The cvt V35s are usually cheaper for a reason..

Your call.

agree...

all it takes is the previous owner not treating the gearbox well, regardless if it's a 2004 model it will still go bang.

they may be cheaper to buy, but they may not be cheaper to own.

For example, CVT gearbox oil need to be ordered special, and they cost about $1000 excluding labour just for the oil itself.

as long as V35 is not lowered, I don't see any issue with ride height especially since they are higher than 350Z from factory, but if you are worried about ride height as other ppl said should have gone for a 4WD. heck we have a RAV4 in addition to he V35 and the RAV4 is a great affordable 4WD!

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

I have a 4dr 6mt and can assure you that ride height is not an issue. It is only slightly lower than my VX commodore and even though I was really careful about hitting parking bump stops etc in the first months with the car it seems to just go over them. Certainly no overhang issues for normal driveways and suspension is quite comfortable even running 46psi in my tyres for higher performance and grip levels.

Several other coupe owners I know have lowered their cars and have done damage to front bar mainly but std height is no problem.

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

I currently drive my R33 on these roads and I do it relatively comfortably if the road isn't muddy and has been graded regularly. Only issue is the tyres that I have on my car are shit on dirt... literally like driving on marbles. I imagine coil overs and neg camber are only going to make this worse.

In fact, I'm willing to say I take my R33 bush than most people in Sydney take there 4WDs :)

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

This is the kind of response I was after, my R33 scrapes a few driveways at standard ride hight and I don't want a car that is worse! Thanks :blink:

There seems like there are a lot of people politely suggesting I reconsider a CVT model... perhaps a little more research is in order on my part, and not just the cost of servicing and/or replacement... Though I'm still thinking that it will be like any other car where a thrashed one will break and one that hasn't been thrashed will break some time after the thrashed one, though I need to remind myself that CVT isn't exactly conventional :down:

This is how mine sits lowered approx 1" all round on 350z suspension. No clearance issues at all but because I added the factory front lip, just need to be extra careful when parking up against gutters and going up certain driveways.

Mine is a series 2 350GT 5spd Auto. You should be able to pick a decent example of these between low to mid 20s. (late 2004 onwards)

IMG_6910.jpg

IMG_6903.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...