Jump to content
SAU Community

Recommended Posts

For some time now I have been considering buying a daily car to cruise around, and the V35 350GT-8 filled my criteria and budget. I am aware of the gearbox expenses associated with the CVT models. Unfortunately this has only made me wary so I'm now after another issue that might knock it out of my "daily shitbox" list :)

What I am after is the standard ride height of the car... if possible in comparison to a standard R33 (what I currently have :) ) Reason being my R33 is all well and good at the moment but I imagine the days where I would drive along a dirt road in the bush without a second thought are coming to an end :D

So please post up figures, experiences bottoming out, stories about smashing front bars or how I am a retard for choosing a V35 4 door :D

Link to comment
https://www.sau.com.au/forums/topic/299485-v35-sedan-ride-hight/
Share on other sites

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

Re: ride height, I have no idea.

Re: your worries on the CVT... then why don't you consider the 350GT sedan (without the -8)

you do realise that the V35 sedan is also available in 5 speed conventional automatic (same as 350Z's & V35 coupe's) transmission as well? It even is available in 6sp manual if you look hard.

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

I have considered it, but one of my criteria is price... unless I get one imported (which I am considering...) I can only afford the 350GT-8. Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

But back to the subject, if it rides too low for my liking I won't buy ANY V35, be it CVT, auto, manual or Fred Flintstone style. Would probably go a WRX or an Aristo :down:

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

Also, my concern isn't that great. I throw about $200 worth of gearbox oil into my R33 every 12 months, $800 every 100,000km is a little more but if that is what I have to pay then I will have to pay it.

Major fear would be the gearbox failure, which I would imagine would be uncommon as the cars aren't 11ty years old and (hopefully) have had relatively easy lives.

If you can't afford the auto or manual then you shouldn't consider the cvt either... I think a new cvt is in the order of $17000 and noone in Australia specializes in fixing this particular xtroid one.. cvt failures are more common than you might like to believe.. The cvt V35s are usually cheaper for a reason..

Your call.

agree...

all it takes is the previous owner not treating the gearbox well, regardless if it's a 2004 model it will still go bang.

they may be cheaper to buy, but they may not be cheaper to own.

For example, CVT gearbox oil need to be ordered special, and they cost about $1000 excluding labour just for the oil itself.

as long as V35 is not lowered, I don't see any issue with ride height especially since they are higher than 350Z from factory, but if you are worried about ride height as other ppl said should have gone for a 4WD. heck we have a RAV4 in addition to he V35 and the RAV4 is a great affordable 4WD!

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

I have a 4dr 6mt and can assure you that ride height is not an issue. It is only slightly lower than my VX commodore and even though I was really careful about hitting parking bump stops etc in the first months with the car it seems to just go over them. Certainly no overhang issues for normal driveways and suspension is quite comfortable even running 46psi in my tyres for higher performance and grip levels.

Several other coupe owners I know have lowered their cars and have done damage to front bar mainly but std height is no problem.

If ride height is your worries for going over dirt roads....why bother with a skyline?? Buy a 4WD.

I currently drive my R33 on these roads and I do it relatively comfortably if the road isn't muddy and has been graded regularly. Only issue is the tyres that I have on my car are shit on dirt... literally like driving on marbles. I imagine coil overs and neg camber are only going to make this worse.

In fact, I'm willing to say I take my R33 bush than most people in Sydney take there 4WDs :)

You can drop a V35 to a reasonable looking height without it being too much trouble.

The wheels are located fairly close to the front and back of the car, e.g. there is not much overhang to hit on driveways. Most of the stuff underneath the car is tucked up pretty well so speedhumps dont bother me either.

This is the kind of response I was after, my R33 scrapes a few driveways at standard ride hight and I don't want a car that is worse! Thanks :blink:

There seems like there are a lot of people politely suggesting I reconsider a CVT model... perhaps a little more research is in order on my part, and not just the cost of servicing and/or replacement... Though I'm still thinking that it will be like any other car where a thrashed one will break and one that hasn't been thrashed will break some time after the thrashed one, though I need to remind myself that CVT isn't exactly conventional :down:

This is how mine sits lowered approx 1" all round on 350z suspension. No clearance issues at all but because I added the factory front lip, just need to be extra careful when parking up against gutters and going up certain driveways.

Mine is a series 2 350GT 5spd Auto. You should be able to pick a decent example of these between low to mid 20s. (late 2004 onwards)

IMG_6910.jpg

IMG_6903.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...