Jump to content
SAU Community

Recommended Posts

Hey guys, well, I pick her up tomorrow night :blink:

Just a few things I'd like to know:

I've driven a few R33 GTST's before, and love the suction sound of the turbo, on the GTR, I can't hear this, is this because it has a stock CAI or the fact it doesn't have external BoV's?

In regards to BoV's, what should I look for? BoV's are sex.

Exhaust-wise, what size should I aim for? And I do have a thing for the Dual Exhaust look.

Many thanks

Karl

Link to comment
https://www.sau.com.au/forums/topic/299568-gtr-r33-questions/
Share on other sites

Get apexi twin pods and a full stainless exhaust. The spool on my old car was quite noticible like that.

Don't get bovs... Leave the stock ones.

HKS Hi Power Silent exhaust = teh sex.

Quick clip of my old car:

http://www.youtube.com/watch?v=O4Kdquht20M

http://www.youtube.com/watch?v=mBeY4dAaV2Q...feature=channel

Edited by Ten Four

Take out your stock airbox and replace the intake with pod filters. That will give you the induction noise your after. As far as BOV's go, it's all about personal preference. Wouldnt bother getting one until you boost your car though otherwise you'll be dumping too much air and your car will run rich.

Take out your stock airbox and replace the intake with pod filters. That will give you the induction noise your after. As far as BOV's go, it's all about personal preference. Wouldnt bother getting one until you boost your car though otherwise you'll be dumping too much air and your car will run rich.

thanks_wikipedia.jpg

I've driven a few R33 GTST's before, and love the suction sound of the turbo, on the GTR, I can't hear this, is this because it has a stock CAI or the fact it doesn't have external BoV's?

In regards to BoV's, what should I look for? BoV's are sex.

/facepalm

BOV's are gayer than Freddie Mercury gargling cum.

Stock BOV's work perfectly at 600+hp at the treads.

Hey guys, well, I pick her up tomorrow night :rofl:

Just a few things I'd like to know:

I've driven a few R33 GTST's before, and love the suction sound of the turbo, on the GTR, I can't hear this, is this because it has a stock CAI or the fact it doesn't have external BoV's?

In regards to BoV's, what should I look for? BoV's are sex.

Exhaust-wise, what size should I aim for? And I do have a thing for the Dual Exhaust look.

Many thanks

Karl

Karl.

Looks like what you want is something that says 'look at me' or 'pull my car over officer'.

Dog sneezing and squeaker toy noises that aftermarket BOV's make are some of the most obnoxious noises made by anything man made. There are no aftermarket BOV's that are upgrades of the factory GTR ones.

Be thankful that a factory jap performance car can be ultra fast without them.

Karl.

Looks like what you want is something that says 'look at me' or 'pull my car over officer'.

Dog sneezing and squeaker toy noises that aftermarket BOV's make are some of the most obnoxious noises made by anything man made. There are no aftermarket BOV's that are upgrades of the factory GTR ones.

Be thankful that a factory jap performance car can be ultra fast without them.

+1

Factory GTR bov's are the coolest sounding ones anyway! :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...