Safc Ii In A R32 Rb20det

[woggin]

heyas,

i need some help setting up an SAFC II in my mates 32gts4, i installed the safc and i know its wired in right, i have the throttle set diagonally upward right and set to 6cyl, i have hot-wire selected and this is where is gets confusing, i have the in out scale set to 2, so 2in 2out, then next menu is a cal. menu with the same Xin Xout which is set a the factory 1 at the moment, so cal. 1in 1out, i have read somewhere on here the scale should be set to 2in 4out, but when i tried this with his rb20 it ran like a cop with a HUGE misfire at 3k, which didnt allow the motor to rev past 3.5 or so....so my Q's are

wat should the scale be set to?

and

wat should the cal. be set to?

the car seems to run fine on 2in 2out so i am leaving it there until i can get somebody to give me straight facts which the motor is happy with.

the car has the following mods,

3" turbo back

FMIC kit

Pod filter wit mesh screens removed

13psi

and the SAFC II

cheers

wog

[woggin]

so nobody is running an SAFC in there rb20 powered vehicle??

[ako299]

i am running one in mine but somethin is wrong still tryn to work it out.. nothing comes up on the screen no more only the key pad lights up orange??? car didnt run. so i unplugged it do u no anything about it .. taking it to tuner next week to try get fixed then tuned again...

[woggin]

well i have wired a few in, not sure wat would cause the screen to not work and the pad to work, maybe the screen is fubared!

wats your location? if your in perth i could have a look at it for you, i think most people go powerFC which is why i have got limited responses in this thread, but once i find the proper settings ill post em up for others, people ask these sorta Q's!!

-wog

[gotRICE?]

Apexi.com

Click USA

Click Support

All the info is in the PDF.

[woggin]

yea i know, i decided to read the manuals instead of just looking at the pin outs pics, eventually found the settings, anybody who is wondering, RB20DET is Hotwire and IN4 OUT4