Jump to content
SAU Community

R34 Trust Extension Dump Pipes On R32gtr?

gtr fan

By gtr fan,
in Engines & Forced Induction

 Share

Recommended Posts

gtr fan Experienced

gtr fan

Posted
  • Author
Posted

So use r33 sensors?

But then these have to be bent to clear some other pipework or cabling don't they?

Maybe I should just go the Tomei's. I already have a good aftermarket front pipe but I don't the its as wide as the tomei outlet.

Angus Smart Grand Master

Angus Smart

Posted
Posted

Go tomei, the trust ones are a pita, i swapped mine out about a year or so ago..

my new front pipe wasnt quiet as big as the tomei outlet either but a die grinder made it a little better for flow.

Brandon Veteran

Brandon

Posted
Posted

Make sure you got the gtr one and not the vspec ones. They should all fit perfectly (maybe o2 will need some work) across all 3 models but the 34vspec has extra o2. No biggy, just need to find a bolt or bung to seal it up.

9krpm Mentor

9krpm

Posted
Posted

Why bother with the O2 sensor?

The RB26 is not a fuel efficient engine and having the O2 won't help much.

I changed my Mines dump and front pipe, which is similar to the Tomei dump, to the Greddy and gained a few hundreds rpm of boost response.

BTW does your Greddy front pipe have a flex pipe? If it doesn't, it would be best to get one installed.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

ORIGINAL Trust pipes come with adaptors, so it doesnt matter what O2.

be careful of copies though. There are a solid number of cheap knockoff's floating around for a while whose flanges etc were all uneven, different sizes etc.

STATUS Grand Master

STATUS

Posted
Posted (edited)
Thanks everyone, I have spotted a genuine set. Just know there are mixed opinions about these pipes.

The only reason I am considering is because the price is not much more than tomei dumps.

they are the best flowing kit on the market.

I actually think there was a set going cheap at autobarn narre warren when i was down there last, nearly bought it as a spare.

Edited by URAS
Moodles2 Grand Master

Moodles2

Posted
Posted

Just be mindful about the O2 sensor types, R32 GTRs use a Titania based sensor, while 33's and 34s use a Zirconia based sensor, you can't use a Zirconia based sensor on the R32 GTR ecu (well you can, but it won't work as well).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...