Jump to content
SAU Community

Recommended Posts

hey all time to part with my much beloved rims which i purchased new and have taken the greatest care of to maintain perfect condition. Rims are the Wedsports SA70 model size 18x10.5 +18, perfect fitment for GTR's and newer EVO's (as ive been told by an Evo 10 owner), but will fit any other car as well as long as you are game. two rims have 80% tread Bridgestine RE050A 255/35/18 and other two have 80% Michellin Pilotsports 255/35/18, all purchased new (was very painful on the wallet). all tires are run flat as well. only problem with the wheels is one wheel has slight rash on outer lip due to gay sydney pot holes which left a slight rash approx 3cm, barely noticeable, the rest are perfect!

located in sydney (marrickville) contact via PM is best.

cheers

Trong

SA70-1-1.jpg

SNC00055.jpg

SA70-3.jpg

price: $3000

Link to comment
https://www.sau.com.au/forums/topic/300866-weds-sa70-18x105-18/
Share on other sites

PM's replied. yea they fit on the GTST fine with plenty of clearance. the 2nd and 3rd pics on post #3 shows fitment on front and rear on my car

  • 2 weeks later...
  • 5 weeks later...
  • 1 month later...

For anyone doubting these wheels wil definately clear AP Racing 6 pots and evo x brembo combinations let alone 33 gtr brembos...(which are smaller than Evo & Sti Brembos)

Will be easy fit in R33/R34 GTR guards.

R32 GTR will need a light lip roll.

the GTSt's and Silvia series only if your game enough and have supporting suspension mods (camber) and correct stretched tyre combo, raised like a 4wd or guard work for front and rear clearances

free bump dom as these are some craaaazzzzzzyyyyyy wheels you got there...

Edited by krayzie32

cheers for the clarification :devil: the wheels will easily clear any skyline brake combo with ease and will sit very nicely on Evo's as well. on my car, only a lip roll and a slight flare was done to have them sit the way they do, but the new rims are now on which renders the work useless as i need to bolt on 50mm flares lol in all honesty, just throw me a decent offer as these need to be sold to clear up some debts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...