Jump to content
SAU Community

Recommended Posts

Do any race cars run stock airboxes?

Plenty,

Including some of the hotter factory specials like the Nismo versions of the GTR of various flavours Z tune , R tune etc..

The mines R34GTR has stock airbox/ BOV, a lazy 600+ HP and notorious response.

Someone can try and tell people it doesn't sound good but, they will be seen as being faggy for saying so.

Why pay money for Pods when they are a step backwards in power on a GTR without a cold air box and feed?

Even with a CAI forking out over $500 to set it up nets you at best 2hp or so. It's what you call a good waste of money. $500 is better spent on something else.

Plenty,

Including some of the hotter factory specials like the Nismo versions of the GTR of various flavours Z tune , R tune etc..

The mines R34GTR has stock airbox/ BOV, a lazy 600+ HP and notorious response.

Someone can try and tell people it doesn't sound good but, they will be seen as being faggy for saying so.

Why pay money for Pods when they are a step backwards in power on a GTR without a cold air box and feed?

Even with a CAI forking out over $500 to set it up nets you at best 2hp or so. It's what you call a good waste of money. $500 is better spent on something else.

I found this pixxor of an Mines R34 GTR replica.

Doesn't look stock to me.

2853_4lo.jpg

Do any race cars run stock airboxes?

I believe sav_man's 33 N1 which he ran Targa with is the stockest I've seen with just exhaust system done and ecu. Everything else is stock. Pushing more than 300rwkw with more than 95% duty on injectors. So yes it can be done but it all depends on what your objective is. For his, I think he just wanna keep the whole N1 version of the car as much as possible.

Councillor: Do what everyone suggested. My pick for exhaust would be Kakimoto Regu 06&R because of the very distinctive RB brumble they have (yes I've heard a few exhaust and by far, the Kaki's the most distinctive) and the "titanium" looking tip (if I hadnt got my Trust TI-R, I would be getting this). But if you prefer quieter ones, get the HKS Slient. The HKS one will be loud or sound good on high rev but on idle, its pretty docile.

Ultimately if you're not after high power, getting an ecu after the exhaust's been done is required. You will be amazed by how much difference a tune can do. Not so sure about the oil cooler though (its a good to have for street car imo, not a must have). If you need it, get it. If not, dont bother. I wouldnt have a clue because mine came with the factory oil cooler.

I'll say this, DO NOT get dumps for your GTR unless you're doing turbos too. The labour cost is ridicules if you're just doing dumps. And if you're not running really high power, its probably bugga all difference.

I believe sav_man's 33 N1 which he ran Targa with is the stockest I've seen with just exhaust system done and ecu. Everything else is stock. Pushing more than 300rwkw with more than 95% duty on injectors. So yes it can be done but it all depends on what your objective is. For his, I think he just wanna keep the whole N1 version of the car as much as possible.

Targa rules say the intake system (including Injectors) must remain standard!. Also the car must run on a standard ECU, in other words you can change your ECU so long as when the scruitineers plug in the original ECU the car must run.

Ash

http://www.skylinesaustralia.com/forums/R3...-s-t301285.html

Looks like a good buy for 500bucks. Maybe look at that before sourcing something new.

Ash: Thanks for the info but yea, sav_man's N1's running very well for a stock car.

I found this pixxor of an Mines R34 GTR replica.

Doesn't look stock to me.

2853_4lo.jpg

That particular car has plenty of 'similar performance mods' but, is actually a 'replica' meaning it's not built by mines. It has plenty of extra modified bits that aren't the same as the mines car.Although quick, It's slower than the mines car.

have a look at the vid link I posted and you will see the stock airbox. they even point at it for you.

There have been some back to back tests on the stock air box that prove it's not a power restriction.

http://www.skylinesaustralia.com/forums/R3...-s-t301285.html

Looks like a good buy for 500bucks. Maybe look at that before sourcing something new.

Ash: Thanks for the info but yea, sav_man's N1's running very well for a stock car.

They are a good thing from factory. I guess they have been homiligated for motoracing so the factory item must be good.

Ash

Yes thats what I heard. Thats why my advice to TS is not to do that many mods unless he's got plans for really higher power. Personally I feel after tuning, the car already is very quick and enjoyable.

Some good advice from a GTR owner.

On GTR's the 'bolt on boy' approach can see your car go slower and be less enjoyable to drive. Planning out what you want to improve carefully will see you get the best results. Always consider carefully the 'why' before handing over of cash. And it does take some time to filter out the good advice from the ordinary on these forums. It's worth it though. :D

Some good advice from a GTR owner.

On GTR's the 'bolt on boy' approach can see your car go slower and be less enjoyable to drive. Planning out what you want to improve carefully will see you get the best results. Always consider carefully the 'why' before handing over of cash. And it does take some time to filter out the good advice from the ordinary on these forums. It's worth it though. :D

Yea... work out whats a MUST have and what are the GOOD TO HAVE items. Most of the time I see people spending heaps on good to have items and its really make the car a money pit when you add everything together. Its like Macca's upsize, 1 dollar more you get more but ask yourself, can you finish it?

black rims on silver body makes me f....ckn yawn = boring as hell

Sound like a boost comment. If the owner likes it, I dont see a problem with it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...