Jump to content
SAU Community

Recommended Posts

have seen new basically new non import cars where the numbers don't line up

always go by the condition of the car

have a customer evo here with 40k on the clock , clearly the car has done double that

was purchased at auction with 40k on it

and this is not an import thing , the bunky yard dealers around here do it for the local stock . A guy comes around with a briefcase and does it on the yard.

  • 3 weeks later...
  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Anyone used ...http://odometer-check.com/

Looks like a worthwhile service.

It looks as if it's dedicated to Japanese cars too; that the E-Check can trace back to the previous car registration odo reading and not just as the car arrives for auction. Any comments from the more learned?

So, i got curious and pulled out the bunch of papers that came with the car, i can't read japanese, the kanji hanging around didn't help matters, knowing a few words out of a few hundred words just made me more confused.

Then I found 3 sheets of paper, apparently there's some bi annually check the car owners in japan have to do, and i found the most recent one and it has 13,543kms on it, with a weird date that i do not recognise.

I've attached a picture of the date + kms reading. Now, can anybody tell me how does Year 19, Month 10, Day 30 relate to the date system used by the rest of the world?

post-61332-1274686558_thumb.jpg

30 October 2007, that was the mileage :( I take it you paid pretty decent money for it :ermm:

so the months and days are the same, how does year 19 translate to 2007? Is it the reign of some emperor?

Well for an N/A supra, it was actually pretty cheap. Compared to the others i saw on carsales, so i just got it.

I'm in the game of restoring CBR 250RR and I find the same thing with these bikes. Most (if not all imports) have been wound back

I don't get involved in this sort of act as a moral stance although it' so easy to do. With the bikes there are so many tell tale signs that indicate how many klms are on it.

There are marks for example on bolts that have been tighten from factory and this helps me identify the legitimate ones from the bad ones.

What sort of things can you look for in cars for example that would be a true indication of klms even after the dealers magic shiny spray stuff?

For example, would worn lettering on wiper stalks or worn pedal rubbers give you a rough idea on klms?

I'm in the game of restoring CBR 250RR and I find the same thing with these bikes. Most (if not all imports) have been wound back

I don't get involved in this sort of act as a moral stance although it' so easy to do. With the bikes there are so many tell tale signs that indicate how many klms are on it.

There are marks for example on bolts that have been tighten from factory and this helps me identify the legitimate ones from the bad ones.

What sort of things can you look for in cars for example that would be a true indication of klms even after the dealers magic shiny spray stuff?

For example, would worn lettering on wiper stalks or worn pedal rubbers give you a rough idea on klms?

Brake pedals & seat wear are one area you can look for. As far as warn wiper stalks, the lettering on mine is fading/smearing due to the paint not being very long lasting. So in my case it's not an indication of kms, rather just a defect in the materials of the car. So you have to try and decide if things are wear & tear from high mileage or from sloppy materials used.

I was working on a bike today in my workshop and I was having a good look at the dash for signs of it being tampered. All the screws at the back looked like they have never been touched until I noticed a bracket to hold the wiring in the wrong spot.

I gave the dash a clean and you can see a smudge mark on the inside of the glass.

I wonder how that got there?

Actually, I think you'll find a lot more tampering happens at the Australian end than the Japanese end...

Agree. All the tampering I have found out about has been done in Australia.

And I've bought a genuine low kms car from a Japanese dealer once, too.

i hear those bloody japs eat human flesh and conquer other countries with a ruthless regeime and get up to all SORTS of mischief.

seriously bro why the racism?

Real Name: Jamie

Joined: Yesterday, 07:53 PM

posts: 10

i guess now you can PM that guy for those GTR seats you wanted in the bris classifieds ;-)

I found an ad from the previous owner of my car, trying to sell it in 2005 from Japan (can't find it again now, I saved it on my computer). He had noted it had ~112,000kms on it, IIRC. Then when it was complied - by someone he knew in ACT - paperwork says it was shown has having something like 73,000kms (off the top of my head). Now shows 113,000kms so I think I have to add around 39,000kms to that LOL.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...