Jump to content
SAU Community

Who Is Going To Tokyo Autosalon 2010?


Recommended Posts

usually there is a thread in the Japan section with a few people organising to meet there from both here and SAU'ers that are over there...

But there appears to be no such thread this year! :D

usually there is a thread in the Japan section with a few people organising to meet there from both here and SAU'ers that are over there...

But there appears to be no such thread this year! :D

Would you be able to move it there please?

Cheers Ash

  • 3 weeks later...

Just rocked into Tokyo , a quick burn round the city and kicking back with a beer and about to head out for a feed.

Either going to Mines open day tomorrow and Auto salon Sunday or vica versa but I'll be definitely at Daikoku Futo on Saturday night. My hotel is about 10-15mins away.

Looking forward to a good weekend!

Just rocked into Tokyo , a quick burn round the city and kicking back with a beer and about to head out for a feed.

Either going to Mines open day tomorrow and Auto salon Sunday or vica versa but I'll be definitely at Daikoku Futo on Saturday night. My hotel is about 10-15mins away.

Looking forward to a good weekend!

Nice... take some pics please!! I cant be there this year, but have been to several before... Daikoku Futo should be pumping on Sat night also... enjoy!

Just got back and quite dissapointing this year. Seemed to have fewer cars and the booths were less than impressive and smaller. Perhaps cutting down on cost and the number of people there seemed lower.

Nissan wise, no interesting 35 GTR's but a couple of nice 34's. The car that caught my attention however was an S class Benz, I love this ....

post-5116-1263649948_thumb.jpg post-5116-1263649987_thumb.jpg

post-5116-1263650061_thumb.jpg post-5116-1263650094_thumb.jpg post-5116-1263650187_thumb.jpg

A couple of interesting things

post-5116-1263650008_thumb.jpg post-5116-1263650024_thumb.jpg

Wouldnt mind this as a daily

post-5116-1263650294_thumb.jpg

post-5116-1263650161_thumb.jpg

Yeah I was out at Mines this arvo and was haivng a good chat and they reckon they pulled the pin due to the cost of a booth these days at the Salon and globl economic woes.

A few others have done the same and for some other big names this will probably be their last.

Went to Daikoku Futo there were heaps of cars and couldnt get in !! Cops came and shut it down real early!

Just did a few laps in the GTR around the place and watched a bit of the cop battle from outside .

Everyone was heading to another car park out at Ibaraki but headed back to hotel via a few highway runs.

Pretty dissappointing its over so bloody early these days!!

went to daikoku on friday ngiht was pretty kicking... cops didnt shut it down until really late!

went to mines today also around 2pm (saturday) .. the guy there seemed pretty bored and showed us around the workshop

had fun with the rental car in the wangan tunnel last night! hahaha tolls are a killer though

will put autosalon pics up soon.. going again tomorrow to get some more pics

Yeah I was talking to Jap mate who went out friday night and said fri was good.

Carpak was packed Sat night but ccps were anal about shutting it down.

Pretty funny to listen to them telling everyone " could you please return home, if not we will come to your house and have a talk with you"

Technically in Japan they cant really do a thing to you but tell you to move on but on the other hand technically they can throw you in the slammer for a month without laying any charges on you. Thus the reason everbody bails !!

There was some fast cars flying on the highways last night but no fun for me with limiter kicking in at 4000rpm on new engine tune.

Yeah Japanese can have some of the worst customer service at times.

Mines could have made that alot more customer friendly. E.g free coffee, maybe some bargain specials, just be a bit more open. It was an open day after all !!

Even being able to speak Jappa to them and not the first time there, they were hard to get much enthusiasm out of them.

After having a good yak to them and them saying about not doing Auto Salon due to costs and economic woes you think you be doing your best to attract potential customers.

But thats the Japanese way. Live here long enough an you'll understand, same way you'll understand what its like to bang ya head against a wall everyday.

Got some good pis of the 34 and the misso got some sly pics of both the 35's.

I realised today that I must have been staying in the motorbike capital of Japan (Ueno), been hearing bikes roaring up and down the Chuo Expressway all week.

I agree, I knew Autosalon must've been smaller this year when I didn't see a few stores there and it only took half the day to go through the whole thing. A bit dissapointed too.

ahhh good old ueno... bit different to croyden hey hahah

i live in eltham, so this is also a bit different for me

... im staying just down the road in minowa (h19) on the hibiya line

I agree, I knew Autosalon must've been smaller this year when I didn't see a few stores there and it only took half the day to go through the whole thing. A bit dissapointed too.

Not to mention much much less models...

Quite liked staying in Ueno, plenty of food and things to look at. The museums were also a good timewaster. Might stay there again next time, nice and easy to get to anywhere you need to quickly. It's on the JR Yamanote Line and the Keisei Skyliner departs to the airport from Ueno.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...