Jump to content
SAU Community

Recommended Posts

I would go for a high flow panel filter from K&N or Apexi. You can buy the K&N filter from Autobarn and the Apexi one most i think some traders on the forum sell.

In terms of the pod filter, again I would go for a K&N or Apexi. Depending on which state you're in, not sure if this would be a defect modification for you. Studies have shown the Apexi produces most power with the best filtration with the K&N coming in second best.

Cheers

Pod filters are a waste of time and don't gain any real performance over a high quality panel filter in stock airbox.

You just need to look at the Mines R34 GTR or any Mines car for that matter he uses panel in stock air box.

Go the k&N panel.... :rant:

4 an N/A +1 on keeping the stock airbox with a hi flo panel filter... really not worth it unless ur after hektic induction noise lol, u will need it fully encolsed, CAI, it fully mounted etc 2 much effort lol

4 an N/A +1 on keeping the stock airbox with a hi flo panel filter... really not worth it unless ur after hektic induction noise lol, u will need it fully encolsed, CAI, it fully mounted etc 2 much effort lol

I honestly don't hear any noise difference on an NA motor. Unless the hood is open and I'm sticking my head in to a get good look, I can't hear it.

On a turbo set up, it's pretty obvious.

on some NA cars it's very obvious though. i have had a pod on 3 6 cylinder cars (falcon, commodore and magna) and the falcon and magna it made a massive difference to the intake noise (sounded throaty) but the commodore it didn't do a thing.

A pod will suck hot air from the engine bay if you dont have a shroud for it and some form of cold air intake.

Go the quality panel filter

Hot air = fail

Yes should have explained self better, was thinking of a Pod inside a custom airbox

Pod filters are a waste of time and don't gain any real performance over a high quality panel filter in stock airbox.

You just need to look at the Mines R34 GTR or any Mines car for that matter he uses panel in stock air box.

Go the k&N panel.... :D

Thanks

4 an N/A +1 on keeping the stock airbox with a hi flo panel filter... really not worth it unless ur after hektic induction noise lol, u will need it fully encolsed, CAI, it fully mounted etc 2 much effort lol

Thanks, was just asking as these things are so underpowered, not that I want it going to hard for my leaner daughter.

Just feels so slow compared to my 400rwkw+ BA Turbo.

Will just go with a K&N Panel Filter and look into improving the exhaust.

I went with the Apexi power intake and decided to make my own heatsheild, still not finished the sheild gotta make it look nice.

post-63710-1263319346_thumb.jpg

Cost me about $30 to make it, makes a big difference if its shielded or not

Thats what I was thinking, Thanks

Thanks, was just asking as these things are so underpowered, not that I want it going to hard for my leaner daughter.

Just feels so slow compared to my 400rwkw+ BA Turbo.

Will just go with a K&N Panel Filter and look into improving the exhaust.

i'd be worried if it didn't.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...