Jump to content
SAU Community

Recommended Posts

All items located in Cairns, QLD. PLease contact me via e-mail ([email protected]) as keeping up with pm's with the only 1 pm every 5 mins rule makes it very hard. I can also be contacted on 0437838032.

Item: Tomei Pon Cams

Condition: Brand new, in original packaging.

Price: $700

tomeicams2.jpg

tomeicams1.jpg

Item: Tomei Cam Gears

Condition: Brand new, in original packaging.

Price: $300

tomeicamgears2.jpg

tomeicamgears.jpg

Item: Tomei Cam Cap Studs

Condition: Brand new, in original packaging.

Price: $300

tomeicamcapstuds.jpg

tomeicamcapstuds2.jpg

Item: Tomei Valve Springs

Condition: Brand new, in original packaging.

Price: $500

tomeivalvesprings.jpg

tomeivalvesprings2.jpg

Item: Tomei Sump Baffel

Condition: Brand new.

Price: $350

tomeisumpbaffle1.jpg

tomeisumpbaffle2.jpg

Item: Tomei Metal Gasket Kit

Condition: Brand new, in original packaging.

Price: $600

tomeigasket1.jpg

toeigasket2.jpg

Item: Adjustable R32 GT-R Rear Camber Arms

Condition: Brand new, in original packaging.

Price: $250

rearcamberarms2.jpg

rearcamberarms.jpg

Item: Mines Style cam cover baffles

Condition: Brand new

Price: $150

camcoverbaffles.jpg

Item: Blue alloy alternator pulley

Condition: Brand new, in original packaging.

Price: $40

alternatorpulley.jpg

Item: Oil Cooler Kit, Filter relocation

Condition: Used

Price: $200

oilcooler2.jpg

oilcooler.jpg

oilcooler3.jpg

Item: c's Short Shifter

Condition: Used

Price: $250

csshortshifter.jpg

Item: Nismo Oil Cap

Condition: Brand new, in original packaging.

Price: $100

Item: Nismo Radiator Cap

Condition: Brand new, in original packaging.

Price: $100

nismooilRadiatorcap.jpg

Item: Greddy Turbo Timer

Condition: Used

Price: $50

greddyturbotimer.jpg

Item: Standard Igniter

Condition: Used

Price: $50

igniter.jpg

igniter2.jpg

Item: Nissan oil pump gasket

Condition: Brand new, in original packaging.

Price: $20

oilpumpgasket.jpg

Item: Gates Timing belt

Condition: Brand new, in original packaging.

Price: $80

gatestimingbelt.jpg

Item: Accel coils x 3

Condition: Brand new, in original packaging.

Price: $100

coils1.jpg

Item: Greddy Dual Gauge Pod

Condition: Brand new

Price: $80

gagepod1.jpg

Item: ARP Head Stud Kit

Condition: Brand new, in original packaging.

Price: $500

arpheadstuds3.jpg

Just to be clear. From now on anything purchased off me that is sent via post, i'm not responsible for what happens to it after i drop it off at the post office. Poastage will be the buyers risk otherwise i may as well just dump all the parts in the bin.

Cheers,

Rob

After much sweating the cam gears finally arrived this morning. That's 10 working days or twice the stated delivery time from Austrlia Post. Worth considering Express or Registered next time.

Packaging good and exactly as described.

Thanks.

What brand is the oil cooler fittings and relocation kit Earls, speedflow etc?

Not 100% of the details of the kit as I did not buy it new. The pics show exactly what is included. Oil cooler is sold pending payment.

Cheers,

Rob

haha those radiator caps are $75 brand new from just jap

Right you are. Radiator Cap is now up for grabs @ $70. But the oil cap has increased to $140. Thank you for pointing out the value of these items as I was unsure.

Cheers,

Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...