Jump to content
SAU Community

Recommended Posts

hello SAUers,

i have a Fujistubo Super-Ti Titanium 3.5 inch catback exhaust on my R33 GTR, as you will all know they are known for being quiet, i mean the car is loud past 3500 rpm buts its really quiet on idle, i was happy with it but sometimes i do feel like having a louder exhaust that is a bit louder when on idle as well, im currently geting work done on the car and also put in a high flow cat and JJR Front Pipes, i was told this would alongside increasing flow also give the car a deeper note, but i am wondering whether its worth it to get the resonator cut out and put in a straight pipe, would this help with flow as well or will is just increase the exhaust volume?

its a tough decision as currently cops never hassle me as the exhaust is under the legal limit and quiet on idle when i get pulled over, is it worth getting this done and have the extra attention from police and possible defects ?

Any help appreciated

Cheers

Adam

Link to comment
https://www.sau.com.au/forums/topic/303159-removing-resonator-from-exhaust/
Share on other sites

Leave it alone - good front pipes and a high flow cat will improve flow rates and deepen the exhaust note at idle - it did for me.

When I warm my GTR up it is reasonably quiet up close but the deep note resonates that much that it makes my car port vibrate and rumbles up and down the street just to upset the neighbours. Once warm it is nice and quiet down low to keep the cops happy but as soon as you open it up it has a strong note.

The other thing that the resonator does is to stop the drone when you are cruising along - the drone is something that gives me the shits very quickly.

Give it a try and see if you like it - you can always change the resonator some time in the future if you want to.

I run HKS Priest exhausts on my R33's. These have a front muffler, a resonator and then the rear muffler. The resonator looks like a hot dog muffler and just takes the growl out of the note.

My son has a Trust exhaust with just a front and rear mufflers and it is quite a bit louder.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...