Jump to content
SAU Community

Recommended Posts

Ok so firstly, the problem. Soon as I start the car, it idles fairly smoothly as per normal however you can feel these low-pitched subtle pops/thumps coming out of the exhaust which you can feel while sitting in the car. As I start driving it, the car starts jumping and that low-pitch popping sound becomes consistent with the revs and basically the car barely goes anywhere. I first had it looked at through a workshop and he said it was probably burnt out spark plugs, turns out yes my spark plugs were burnt out so brand new ones were put in.

I picked up the car and the car drove perfect! That was until boost comes in, as soon as boost came in, the same thing happened again (as above). Then for a short period of time on the way home, it was all clear and the car drove perfectly both on and off boost and was as it use to be. But then the problem came back where the missfire and popping/thumping would happen just above 1500rpm. I barely made it home.

Does ANYONE know what the problem is/what's causing it?

Not sure if it's relevant or not, however last week the car overheated due to the plastic spout on top of the stock radiator breaking. I had a new Koyo Aluminium Radiator installed and when I picked it up from that workshop that installed the radiator, that's when this problem occured. However they stated they touched nothing but take out the old radiator and drop in the new one.

If your plugs were that old, and it depends how many km's your OEM coil packs have done, I would suggest if you can afford it to replace all 6 x Coil Packs to compliment your new plugs with after market ones (Splitfire, Superspark etc) to save yourself any headaches in the long run. Superspark's are an excellent choice for the price range.

Ok so firstly, the problem. Soon as I start the car, it idles fairly smoothly as per normal however you can feel these low-pitched subtle pops/thumps coming out of the exhaust which you can feel while sitting in the car. As I start driving it, the car starts jumping and that low-pitch popping sound becomes consistent with the revs and basically the car barely goes anywhere. I first had it looked at through a workshop and he said it was probably burnt out spark plugs, turns out yes my spark plugs were burnt out so brand new ones were put in.

I picked up the car and the car drove perfect! That was until boost comes in, as soon as boost came in, the same thing happened again (as above). Then for a short period of time on the way home, it was all clear and the car drove perfectly both on and off boost and was as it use to be. But then the problem came back where the missfire and popping/thumping would happen just above 1500rpm. I barely made it home.

Does ANYONE know what the problem is/what's causing it?

Not sure if it's relevant or not, however last week the car overheated due to the plastic spout on top of the stock radiator breaking. I had a new Koyo Aluminium Radiator installed and when I picked it up from that workshop that installed the radiator, that's when this problem occured. However they stated they touched nothing but take out the old radiator and drop in the new one.

Hay i had a very similar problem with my R34 after checking all the above mentioned problems new plugs new coils. i pulled the cas spun the shaft and there it was noisey bearings. pulled it apart marked it carefully pressed on new bearings put it back in bang full power again. no problems even put my old coils back in perfect.

It is actually the fastest check out of all the possible problems and $15 to fix.

I maybe over doing it here but. You say it overheated? by how much and for how long? these things have alloy heads, i.e. to hot for to long and your head starts to warp (Very bad) Has it used any coolant at all?

might be something to look into

Found out it was the wiring loom/harness for the coilpacks. 2 of the plug clips were cracked so they were basically half in half out sometimes.

In regards to the head being warped...is this something that could be potential in the near future? What's the easiest way to tell?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...