Jump to content
SAU Community

Recommended Posts

Hey all,

Anyone have one of these? What do you guys think of this?

ebay link

Cheers

Cameron

I have one of these on my car and I got a lot more mid range power with the fitment of this dump pipe.

A very happy customer.

Cheers

Andy

I have one of these on my car and I got a lot more mid range power with the fitment of this dump pipe.

A very happy customer.

Cheers

Andy

Did you get it from these same people?

Thanks for the reply. It was what I was hoping for!

Can't wait to sell my old project car so I can spend it all on my Stagea !

Did you get it from these same people?

Thanks for the reply. It was what I was hoping for!

Can't wait to sell my old project car so I can spend it all on my Stagea !

yep, from the same guys.

the design is inspired by the Dolphin dump from Japan.

And myself being a pain in the ass getting them to make things.

I know that one......I had a car booked in for next Tuesday and rang to confirm....they have kicked me to next month......guess who's not getting any work from me. :huh:

I know that one......I had a car booked in for next Tuesday and rang to confirm....they have kicked me to next month......guess who's not getting any work from me. :(

Westside? My mate Beau no longer works there. so i'd say 50-60% of work would be cut back hey.

back into a less stressful job with normal hours :)

Hey guys,

My mate was saying something about stainless steel dump pipes having a tendency for cracking because of the heat. Is there much truth to this?

Are the dump pipes that you guys got from westside all stainless? If so, I guess there ok then?

Cheers

Cameron

Hey guys,

My mate was saying something about stainless steel dump pipes having a tendency for cracking because of the heat. Is there much truth to this?

Are the dump pipes that you guys got from westside all stainless? If so, I guess there ok then?

Cheers

Cameron

mine is stainless and all OK so far

Hey guys,

My mate was saying something about stainless steel dump pipes having a tendency for cracking because of the heat. Is there much truth to this?

Are the dump pipes that you guys got from westside all stainless? If so, I guess there ok then?

Cheers

Cameron

I think that may be a bit of an old wife's tale.

If it was the case, why are all these Japanese aftermarket companies selling stainless dump pipes?

Let alone the exhaust companies around the world...

btw, mild steel rusts.

So I suppose the only thing to do is have a dump made up out of titanium :)

Edited by iamhe77
I think that may be a bit of an old wife's tale.

If it was the case, why are all these Japanese aftermarket companies selling stainless dump pipes?

Let alone the exhaust companies around the world...

btw, mild steel rusts.

So I suppose the only thing to do is have a dump made up out of titanium :)

I spoke to liverpool exhausts today after reading about a m35 axis on here (forgot the guys name) but he had a custom dump made up but mild steel with a ceramic coating. the price for this including a highflow cat was $1200 :ermm: W-T-H

I am just going to go for this ss dump. Can't wait for that and the fujubitso exhaust to arrive. Then I can get me a FMIC

Edited by euroequip
I spoke to liverpool exhausts today after reading about a m35 axis on here (forgot the guys name) but he had a custom dump made up but mild steel with a ceramic coating. the price for this including a highflow cat was $1200 :) W-T-H

You would also be waiting a long time for them to do anything as they are all talk and little action.

I spoke to liverpool exhausts today after reading about a m35 axis on here (forgot the guys name) but he had a custom dump made up but mild steel with a ceramic coating. the price for this including a highflow cat was $1200 :P W-T-H

I am just going to go for this ss dump. Can't wait for that and the fujubitso exhaust to arrive. Then I can get me a FMIC

Before deciding to get the Stainless ones made by westside i went around to liverpool (i work a few doors away) to get a flange to make a dump they are ususlly pretty good to find hard to get flanges etc. but the quality of their flanges is rubbish so i took it to another place to be copied in stainless and lazer cut. turned out very very nice.

he tried to flog me one of them for a couple of hundred.. but he wouldnt tell me the price.. i asked a few times but he didnt say at all. i told him i didnt like his design as it wasnt a stock replacement. they clearly do it to make you get the full exhaust done there.

anyway his design was a split wastegate style and i wasnt after that either.. (since the turbo housing isnt really split either) and after having split on the gtr i wasnt keen for it again as a big bellmouth design is alot better.

the westside one will be alot better.. but i doubt there are any left at all now. last time i was down there was only 2..

  • 1 month later...
Hey all,

Anyone have one of these? What do you guys think of this?

ebay link

Cheers

Cameron

Anyone want to do a GROUP BUY for 1 of these Dump pipes, spoke to the guy in Sydney and I need 9 more people to make it worth while??

Unless there is somewhere else i can get 1 from?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...