Jump to content
SAU Community

Recommended Posts

Ur replacing stock lightweight forged wheels with cheap-ass weak heavy wheels?

+12 would be flush with the guards, requiring the rear lip to be rolled up which is easy done. They'd be the ones to go with. Next best thing after that would be +20.

Edited by bradsm87

19 X 9.5 + 12 is the Nismo recommended offset for both 33 and 34 GTR's. I know your 18 inch but the width and offset are the same.

http://www.gtr.co.uk/forum/24434-pics-whee...ls-boys-22.html

There is a good thread on the pommie forum. Have a look at that. I currently have 18 X 9.5 + 17 and they need a bit more.

Ur replacing stock lightweight forged wheels with cheap-ass weak heavy wheels?

+12 would be flush with the guards, requiring the rear lip to be rolled up which is easy done. They'd be the ones to go with. Next best thing after that would be +20.

thanx guys, il go with +12 =) its ok, cheap wheels ...so i could play with them..=)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...