Jump to content
SAU Community

Recommended Posts

hey im changing the trans (manual) and diff and probably transfer oil in my skyline... ive got a r34 gt4, so does that mean it has LSD diffs?

if it does, which i think it does, would castrol LSX90 go good in them?

ps. i know theres a sticky for this and ive already posted this there but not gotten a response

thanks for any advice!

Edited by AYW550
Link to comment
https://www.sau.com.au/forums/topic/304281-wat-diff-oil/
Share on other sites

The LSX90 is what I've been using and honestly it does the job fine. I've been told to use Penrite oil as it's better for a tighter shimmed diff and I had a mate who bought Motul oil for his LSD but it just depends how much you're willing to spend and what the purpose is.

In short, LSX90 will be fine. :D

The NA 25GT R34 will most likely have an open diff, unless it's a GT-V model which will then have the GT-t.

If you're wanting to upgrade to an LSD you will have to buy an R33 LSD/housing.

Edit: Just read you have the GT4, sorry I can't answer your question about it having an LSD then.

Hope that helped,

Jimmy.

Edited by -Jimmy-
Link to comment
https://www.sau.com.au/forums/topic/304281-wat-diff-oil/#findComment-5046037
Share on other sites

The LSX90 is what I've been using and honestly it does the job fine. I've been told to use Penrite oil as it's better for a tighter shimmed diff and I had a mate who bought Motul oil for his LSD but it just depends how much you're willing to spend and what the purpose is.

In short, LSX90 will be fine. :)

The NA 25GT R34 will most likely have an open diff, unless it's a GT-V model which will then have the GT-t.

If you're wanting to upgrade to an LSD you will have to buy an R33 LSD/housing.

Edit: Just read you have the GT4, sorry I can't answer your question about it having an LSD then.

Hope that helped,

Jimmy.

thanks for the recomendation the LSX 090 is a good price and will be perfect if i infact have LSD diffs, just trying to find out about the GT FOUR in particular

my dash has a "SLIP" light above the speedo that comes on when the rear breaks loose a bit, does that mean anything about my diffs or is it just the attessa system working?

Link to comment
https://www.sau.com.au/forums/topic/304281-wat-diff-oil/#findComment-5047559
Share on other sites

If you've got a Viscous LSD or a locker type diff you only need standard diff oil. MOST RWD skyline diffs are Viscous LSD, not sure on the GTRs however. A helical diff I think uses standard diff oil too but I'm not 100% on that. If you have a friction type LSD you need the oil recommended by the diff manufacturer. The friction type diffs include clutch pack diffs, mechanical LSD(oil grade is important to stop shuddering) and conical LSDs

Link to comment
https://www.sau.com.au/forums/topic/304281-wat-diff-oil/#findComment-5055821
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
    • Looks great, but I'm always concerned that it makes it difficult to see what level the fluids are at. Am I overthinking this?
×
×
  • Create New...