Jump to content
SAU Community

Recommended Posts

Hey,

I am trying to mount my Alpine Type R Subwoofer. The box doesnt fit without requiring me to take out the spare wheel. I have taken out the spare wheel and placed the subwoofer into the space where the spare tyre goes and i plan to relocate the spare wheel later. I dont want to change the box because this box is tuned to the matching subwoofer.

I got some L brackets, went on tough on the box but i mount the other end to the chassis and go for a drive around the block and bang it comes right off from the chassis. I am using correct screws for metal and keeping them short so it doesn't start screwing into the fuel tank.

I have run out of ideas any help would be greatly appreciated.

If anyone requires pictures i can take some tommorow.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/304958-mounting-subwoofer-headaches/
Share on other sites

Hey,

I am trying to mount my Alpine Type R Subwoofer. The box doesnt fit without requiring me to take out the spare wheel. I have taken out the spare wheel and placed the subwoofer into the space where the spare tyre goes and i plan to relocate the spare wheel later. I dont want to change the box because this box is tuned to the matching subwoofer.

I got some L brackets, went on tough on the box but i mount the other end to the chassis and go for a drive around the block and bang it comes right off from the chassis. I am using correct screws for metal and keeping them short so it doesn't start screwing into the fuel tank.

I have run out of ideas any help would be greatly appreciated.

If anyone requires pictures i can take some tommorow.

Thanks

that box isnt designed right if you have to remove your spare to fit it(sounds like a generic box and some BS a salesmen told you to me). so I wont even go into what you should do to fit it to the chassis

Thanks for the reply sapphiregraphics,

Although the box is an genuine Alpine Type R Box which is the reason why i don't want to change the box, the trunk of a r32 is quite small height wise. That is why i had to remove the spare wheel because the box was few centimeters to tall.

Although the box is an genuine Alpine Type R Box which is the reason why i don't want to change the box, the trunk of a r32 is quite small height wise. That is why i had to remove the spare wheel because the box was few centimeters to tall.

So what you mean is that you have a craptacular generic alpine box which isnt made for your car, doesnt take into account the vehicles design, your requirements, the amp your using or anything else. Oh I forgot to mention the problem of not having a spare etc..

Its an easy fix.

Throw the box away and build a custom one that is tuned for the car, the sub, the power you have (amp in rms) and your musical tastes.

You can also build a box that allows you to have the spare secured in the factory location with relatively easy access to it should you need it.

Problem solved.

Thanks for the reply sapphiregraphics,

Although the box is an genuine Alpine Type R Box which is the reason why i don't want to change the box, the trunk of a r32 is quite small height wise. That is why i had to remove the spare wheel because the box was few centimeters to tall.

I think you meant Generic, they make them to fit shop windows/showrooms , not for the best sound in your required car/space

if you dont think its generic then it should fit like a glove , designed for exact car ?

ditch the box and build custom or mutilate it to fit

  • 1 month later...

those alpine boxes are a no go for imports. every salesperson should know that.

take it back and swap it for the same woofer in a smaller sealed enclousure. they sound pretty average in that box anyway, sealed sounds much better.

  • 2 weeks later...

got a custom sealed fibreglass sub box that goes in the RHS side of the boot, and doesn't come out past the edge of the boot lip. I still have 95% of my boot space and I have plenty of bass.

why you'd put a big sub enclosure in a car i have NO idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
    • Yeah the rule of thumb with an LS is 7psi per 1000rpm. That is decidedly not enough at 6800rpm. I mainly looked for the scenarios where knock started to be picked up and it was later in the session when things were hotter, and oil was thinner, and the pressure was lower than it should be. (i.e very horrible). I am hoping with thicker oil (I was running Penrite ten tenths 10-40, the manual specifies 10-30) that does not leak that it's much improved at that time!!! I am using Project Mu Club Racer CR pads. I'm also using the Project Mu 335C fluid. The symptoms imply that it was fluid that boiled, but no bubbles seemed pretty weird to me when I bled it today. I want to try Castrol SRF as it has a much higher wet temp but, well, I have new Project Mu fluid lol... so I should at least use that. The pedal on track was really noticable. It went from basically normal feeling to instantly near-floor. The car did pull up as before, it was just very much nearly at the floor before the brakes engaged. At that point I pretty much decided the day was very done, it did *kinda* come back during that very slow cooldown lap into the pits. Felt perfectly fine driving home.
    • f**king around with the bro
×
×
  • Create New...