Jump to content
SAU Community

Recommended Posts

Being the responsible parent that I am, I attend lots of PTA meetings at my sons school. We had a police officer there mentioning that there is a huge push through parliament to get 'double demerits' essentially made permanent, especially around school zones.

Anyone else heard any rumblings of this?

Yeh I've heard they are trying to increase the minimum speeding fine from $70 (0-9 km/h over) to $150. i.e. double demerit style fines, normally...

Yes it's a bit outrageous, but the idea is that you shouldn't have anything to worry about if you're not breaking the law...

The way i look at it, the po po and the government are approaching road safety the wrong way. We need better driver training and education, rather than just bigger punishments. But with the amount of revenue that the fines bring in every year, of course the gov'mnt are trying to raise them!

My $0.02...

Thats stupid, it happens to everyone where you don't look at your speedo for awhile and the next time you look you are going 5kms over, im sure as hell not paying $150 for 5kms over the limit

I love it how out of touch the government is when it comes to any issue to do with roads :O It's really fantastic :P I can't wait to lose my license for 3 fines of 9-19kph over :) Go Aussie Go :)

0-9km over is an honest and regular mistake, driver training and education is the key to road safety

implement a system like japans instead of handing out licenses like junk mail and you wont have so many retards on the road

I agree to increasing the fines in the school zones.

I live across the road from my kid's school and the amount of dickheads who go screaming past while the 40km/h zone is in effect is ridiculous. Being a parent of young children I want to see my kids get home safe and as I only live across the street my need to worry about them crossing the road is pathetic.

It's gotten to the point where I have to wait outside after the siren has sounded to help my 8 year old across the street. There have been many instances where I have seen someone come screaming up the road so I now step in front of the car and cause them to come to a screeching halt. What bothers me the most is that 90% of the time, it's some stupid woman who has just picked up her kid(s). I abuse the crap out of them and most times they mouth off back and don't care.

I have been to see the cops about it but they say that there's nothing they can do. I called about having a multanova placed on the road to catch these idiots out and to date nothing has happened.

Many so called "hoon cars" such as V8's and imports come past doing the speed limit while the school zone speed limit is in effect, but these stupid women can't.

If you were to call the police and say that a Skyline is screaming around the school zone the cops would be there in a heartbeat.

Because the police don't care about what's happening in front of my house, I will continue to step out in front of these potential murderers until something is done.

0-9km over is an honest and regular mistake, driver training and education is the key to road safety

implement a system like japans instead of handing out licenses like junk mail and you wont have so many retards on the road

True?? Just wondering (not to go too far OT). Wat is the Japanese system like?? Say, in comparison to ours, and more stringent ones, like Germany or Finland???

13 yrs on same license , dont care they can increase the $ n double up the points :O

As much as Distrbd and myself don't see eye to eye on pretty much anything, I agree wholeheartedly with this. I've had mine for 12 years and havn't lost it once. It all comes down to how you drive as to whether or not you are going to get caught. Sure the coppers will give you troubles in the meantime when you aren't speeding, comes with the territory of owning an import, but you're responsible for your OWN points, not someone sitting in an office making it harder for the people who do speed willingly and the like.

Man up, shut up, and don't speed if you want to keep your license, pretty simple really.

I wouldnt mind seeing this enforced in school zones, especially at primary schools. Interestingly I have noticed that in my local areas at least it seems to be alot of mothers particularly in large expensive SUV's/4wds like prado's, X5's, H3's and rangerover's that disobey the school zone limits most frequently, usually doing the full 70kmph through them. Whereas even the most fully sick wrx's and skylines seem to atleast slow down to within 5-10kms of the limit

28 years with a clean license i dont care if they double the demerits but i recon they should triple the fines

hurt the pocket more might make f**kwits slow down at last

Definitely agreed about the school zones, people speeding through there is ridiculous. Not only do most people not go the 40kms, they go faster than what the speed limit is outside school zone hours.

I also agree with doubling demerits and fines, but i think that should be done over a certain amount, namely 9+kms over. I understand they have to draw the line on how far over you can go somewhere, but i think a $150 fine for 5kms over is stupid. There should be a warning system in place, where say if you get caught going 5kms over, you get 2-3 warnings before you are fined. Going 5kms over the speed limit is an everyday occurrence, and i bet if double demerits came into place permanently for that, then i bet all you guys saying you have kept your license for however many years would suddenly start to see the demerits piling up.

I just finished my probationary period on my license yesterday, having received one speeding fine for 4kms over the limit. Not happy about paying $75 for that

Getting more medieval on speeders goes down well in the court of public opinion which is fueled by the reporting style of the media.

Doubt it 'save lives' though?

But the politicians and police love being able to 'please' the public in this way. They don't have to do anything difficult except make edicts; install this speed cameras here or there, give everyone deouble-demerits etc. "Wow now we look proactive and decisitive...fighting the good fight". :cool:

Too true ^

Its been said numerous times in this thread already, the key to saving lives doesn't lie in harsher punishment, but in better training.

Germany has the Autobahn, where the only deaths and injuries are caused by tourists who don't know the rules. The training over there is really strict, where as here it simply appears strict. They grow up with the right attitude from the start instead of needing to lose their license a couple of times before they realize they are doing something wrong.

it does nothing, I have clients with thousands in unpaid fines and who drive under suspension constantly.

Some people are idiots and will drive regardless, and you find they are the people who own $500 cars and are on centrelink. All they do is setup centrepay to pay off fines through their dole payments at $25 a week and not pick up the confiscated car. Jail is even shrugged at.

There's just no way to stop those people but I find they are the most dangerous road users. Police should continue to target repeat offenders of extreme driving (reckless driving) and people who drive under suspension. In my years I've not met a performance car enthusiast with such a bad record, a bogan or 10 yes, but not a skyline owner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
    • Any update on this one? did you manage to get it fixed?    i'm having the same issue with my r34 and i believe its to do with the smart entry (keyless) control module but cant be sure without forking out to get a replacement  
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if something was binding the shaft from rotating properly. I got absolutely no voltage reading out of the sensor no matter how fast I turned the shaft. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
    • So this being my first contribution to the SAU forums, I'd like to present and show how I had to solve probably one of the most annoying fixes on any car I've owned: replacing a speedometer (or "speedo") sensor on my newly acquired Series 1 Stagea 260RS Autech Version. I'm simply documenting how I went about to fix this issue, and as I understand it is relatively rare to happen to this generation of cars, it is a gigantic PITA so I hope this helps serve as reference to anyone else who may encounter this issue. NOTE: Although I say this is meant for the 260RS, because the gearbox/drivetrain is shared with the R33 GTR with the 5-speed manual, the application should be exactly the same. Background So after driving my new-to-me Stagea for about 1500km, one night while driving home the speedometer and odometer suddenly stopped working. No clunking noise, no indication something was broken, the speedometer would just stop reading anything and the odometer stopped going up. This is a huge worry for me, because my car is relatively low mileage (only 45k km when purchased) so although I plan to own the car for a long time, a mismatched odometer reading would be hugely detrimental to resale should the day come to sell the car. Thankfully this only occurred a mile or two from home so it wasn't extremely significant. Also, the OCD part of me would be extremely irked if the numbers that showed on my dash doesn't match the actual ageing of the car. Diagnosing I had been in communication with the well renown GTR shop in the USA, U.P.garage up near University Point in Washington state. After some back and forth they said it could be one of two things: 1) The speedometer sensor that goes into the transfer case is broken 2) The actual cluster has a component that went kaput. They said this is common in older Nissan gauge clusters and that would indicate a rebuild is necessary. As I tried to figure out if it was problem #1, I resolved problem #2 by sending my cluster over to Relentless Motorsports in Dallas, TX, whom is local to me and does cluster and ECU rebuilds. He is a one man operation who meticulously replaces every chip, resistor, capacitor, and electronic component on the PCB's on a wide variety of classic and modern cars. His specialty is Lexus and Toyota, but he came highly recommended by Erik of U.P.garage since he does the rebuilds for them on GTR clusters.  For those that don't know, on R32 and R33 GTR gearboxes, the speedometer sensor is mounted in the transfer case and is purely an analog mini "generator" (opposite of an alternator essentially). Based on the speed the sensor spins it generates an AC sine wave voltage up to 5V, and sends that via two wires up to the cluster which then interprets it via the speedometer dial. The signal does NOT go to the ECU first, the wiring goes to the cluster first then the ECU after (or so I'm told).  Problems/Roadblocks I first removed the part from the car on the underside of the transfer case (drain your transfer case fluid/ATF first, guess who found out that the hard way?), and noted the transfer case fluid was EXTREMELY black, most likely never changed on my car. When attempting to turn the gears it felt extremely gritty, as if shttps://imgur.com/6TQCG3xomething was binding the shaft from rotating properly. After having to reflow the solder on my AFM sensors based on another SAU guide here, I attempted to disassemble the silicone seal on the back of the sensor to see what happened inside the sensor; turns out, it basically disintegrated itself. Wonderful. Not only had the electrical components destroyed themselves, the magnetic portion on what I thought was on the shaft also chipped and was broken. Solution So solution: find a spare part right? Wrong. Nissan has long discontinued the proper sensor part number 32702-21U19, and it is no longer obtainable either through Nissan NSA or Nissan Japan. I was SOL without proper speed or mileage readings unless I figured out a way to replace this sensor. After tons of Googling and searching on SAU, I found that there IS however a sensor that looks almost exactly like the R33/260RS one: a sensor meant for the R33/R34 GTT and GTS-T with the 5 speed manual. The part number was 25010-21U00, and the body, plug, and shaft all looked exactly the same. The gear was different at the end, but knowing the sensor's gear is held on with a circlip, I figured I could just order the part and swap the gears. Cue me ordering a new part from JustJap down in Kirrawee, NSW, then waiting almost 3 weeks for shipping and customs clearing. The part finally arrives and what did I find? The freaking shaft lengths don't match. $&%* I discussed with Erik how to proceed, and figuring that I basically destroyed the sensor trying to get the shaft out of the damaged sensor from my car. we deemed it too dangerous to try and attempt to swap shafts to the correct length. I had to find a local CNC machinist to help me cut and notch down the shaft. After tons of frantic calling on a Friday afternoon, I managed to get hold of someone and he said he'd be able to do it over half a week. I sent him photos and had him take measurements to match not only the correct length and notch fitment, but also a groove to machine out to hold the retentive circlip. And the end result? *chef's kiss* Perfect. Since I didn't have pliers with me when I picked up the items, I tested the old gear and circlip on. Perfect fit. After that it was simply swapping out the plug bracket to the new sensor, mount it on the transfer case, refill with ATF/Nissan Matic Fluid D, then test out function. Thankfully with the rebuilt cluster and the new sensor, both the speedometer and odometer and now working properly!   And there you have it. About 5-6 weeks of headaches wrapped up in a 15 minute photo essay. As I was told it is rare for sensors of this generation to die so dramatically, but you never know what could go wrong with a 25+ year old car. I HOPE that no one else has to go through this problem like I did, so with my take on a solution I hope it helps others who may encounter this issue in the future. For the TL;DR: 1) Sensor breaks. 2) Find a replacement GTT/GTS-T sensor. 3) Find a CNC machinist to have you cut it down to proper specs. 4) Reinstall then pray to the JDM gods.   Hope this guide/story helps anyone else encountering this problem!
×
×
  • Create New...