Jump to content
SAU Community

Recommended Posts

Hi All

Trying to get rid of the wreck taking up my garage. message me for what you want and ill help you if i can. Some things still available listed below.

Make offers on what you want.

Front bilstein shocks (hard, near new)

Lowered king springs

Removable steering wheel with boss kit.

RB20DET 5 speed with noisy input bearing (has been for 13,000 kms and not getting worse)

R32 Sedan RB25 auto diff head, tall ratio, good for that torquey 3ltr, non LSD

Rear lights, bumper, boot lid, spoiler, front guards, bonnet, both doors with windows. All factory metallic wine/red

Factory RB20 intercooler

front and rear windows

Various interior parts (ask)

Std rear shocks

R32 RB25 motor with flywheel and good clutch, clean runner but needs welsh plugs changed in block.

Car has L/H rear damage but is repairable for road or race, not written off, prepared to sell whole if anyone wants it. Has four stud hubs as I put the five stud GTST gear on my other car. Still rolling so can be put on a trailer no worries.

Also

R32 gtr cams and buckets (no shims)

R32 gtr std exhaust manifolds

Reasonable offers will be taken on everything

Prefer pickup or meet in Sydney campbelltown/bankstown areas

Link to comment
https://www.sau.com.au/forums/topic/305462-r32-gtst-wrecking-and-gtr-cams/
Share on other sites

Mate,

How much for the tail lights? Also do you have a good condition Dash pad.

Regards

Will take 60 for the tailights. The dash is not bad but has a small buldge above the clove box in the normal spot also it is a bit heat shrunk and hard as well, edges raised around the vents etc, would be ok if yours is buggered.

I sent a PM but have got no reply so i guess ill post here

Im after the surround that goes around the Dash instrument cluster (speedo/tacho etc)...the one in the 32 which has the light switch/hazzards/radio/wipers control on it. Im after this with all switches. What is the condition of this part? Picture emailed to [email protected] or sms/call me on 0401 317 009

Cheers!

I sent a PM but have got no reply so i guess ill post here

Im after the surround that goes around the Dash instrument cluster (speedo/tacho etc)...the one in the 32 which has the light switch/hazzards/radio/wipers control on it. Im after this with all switches. What is the condition of this part? Picture emailed to [email protected] or sms/call me on 0401 317 009

Cheers!

Hi,

Sorry for the delay. The switchs are not all good. I have used the light switch in my other car. if youe still interested i will post a pic of the surround for you.

How much to post/courier it to 0812 Leanyer, Northern Territory????

VERY INTERESTED!!

Not sure but could find out next week if you really want it. Probabaly going to cost more to post than to buy!!

Not sure but could find out next week if you really want it. Probabaly going to cost more to post than to buy!!

I don't mind, but my brother lives in wollongong so I could probably arrange for him to pick it up from you for me and then he can send it later to save me some money. If thats easier for you let me know asap :worship:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...