Jump to content
SAU Community

Recommended Posts

Hey was just wondering what people think of this package?

http://www.tweakit.net/shop/product_info.p...roducts_id=5090

I'll be running about 280rwkw on my rb25det

I broke my fpr when i was getting my half cut :D

So yeah decided to just grab an aftermarket one and this one popped up, any opinions?

Link to comment
https://www.sau.com.au/forums/topic/305522-fuel-system-for-my-25det/
Share on other sites

Just buy Nismo 555cc injectors, use the stock FPR.

1. Factory rail, fine

2. Factory fuel reg, fine

You only need injectors, which are around $750 delivered.

There is no need to go aftermarket anything other than the injectors, so leave it that way and buy a replacement OEM FPR.

Trade Nissan should be about the same, if not cheaper.

If i can get an entire RB26 loom for under $700, there is no way a FPR is going to cost anymore than $100-$150.

You'd be up for around $100 to get a Nismo item here so i don't see a difference enough to get excited about

cant remember exactly but nissan wanted well over 200 for a reg. it was cheaper to get a tomei with the rail adaptop and hoses etc. only reason i wanted a new one is because i busted 3 2nd hand ones in less than 5000km's, each time i didnt know they were broken until it was under full load and leaning out to around 15:1. so i got sick of 15yo shit

I agree changing stuff that doesnt need to be changed is a waste of time, effort and money. I say also stick with stock rail and a stock reg. but I'd go the 740's. HEAPS of head room for basically the same money.

just my 2c!

cheers

+1 for nismo 740s, i have heard from a reliable source they are better to tune than most.

also +1 for stock rail and stock FPR, get trade from nissan it shouldnt be too much. buying an aftermarket has zero advantage other than more useless bling bits you need to worry about at this level.

if your going to run twin external pumps or some BS then by all means go for gold on an aftermarket

If you don't need bigger - don't get them.

Only get 740's if you plan for over ~330rwkw later on.

Otherwise the 555's will do the job just as good.

you can never have enough headroom, that is until they become harder to tune.. then its useless.

in this case i have heard that the red nismo 740s are better to tune than the 555s. that being the SR RB specific red nismo items, not 740s in general.

yet yes, 555s will be enough ;) but for the same price i know i wouldnt think twice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...