Jump to content
SAU Community

Recommended Posts

Hey was just wondering what people think of this package?

http://www.tweakit.net/shop/product_info.p...roducts_id=5090

I'll be running about 280rwkw on my rb25det

I broke my fpr when i was getting my half cut :D

So yeah decided to just grab an aftermarket one and this one popped up, any opinions?

Link to comment
https://www.sau.com.au/forums/topic/305522-fuel-system-for-my-25det/
Share on other sites

Just buy Nismo 555cc injectors, use the stock FPR.

1. Factory rail, fine

2. Factory fuel reg, fine

You only need injectors, which are around $750 delivered.

There is no need to go aftermarket anything other than the injectors, so leave it that way and buy a replacement OEM FPR.

Trade Nissan should be about the same, if not cheaper.

If i can get an entire RB26 loom for under $700, there is no way a FPR is going to cost anymore than $100-$150.

You'd be up for around $100 to get a Nismo item here so i don't see a difference enough to get excited about

cant remember exactly but nissan wanted well over 200 for a reg. it was cheaper to get a tomei with the rail adaptop and hoses etc. only reason i wanted a new one is because i busted 3 2nd hand ones in less than 5000km's, each time i didnt know they were broken until it was under full load and leaning out to around 15:1. so i got sick of 15yo shit

I agree changing stuff that doesnt need to be changed is a waste of time, effort and money. I say also stick with stock rail and a stock reg. but I'd go the 740's. HEAPS of head room for basically the same money.

just my 2c!

cheers

+1 for nismo 740s, i have heard from a reliable source they are better to tune than most.

also +1 for stock rail and stock FPR, get trade from nissan it shouldnt be too much. buying an aftermarket has zero advantage other than more useless bling bits you need to worry about at this level.

if your going to run twin external pumps or some BS then by all means go for gold on an aftermarket

If you don't need bigger - don't get them.

Only get 740's if you plan for over ~330rwkw later on.

Otherwise the 555's will do the job just as good.

you can never have enough headroom, that is until they become harder to tune.. then its useless.

in this case i have heard that the red nismo 740s are better to tune than the 555s. that being the SR RB specific red nismo items, not 740s in general.

yet yes, 555s will be enough ;) but for the same price i know i wouldnt think twice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...