Jump to content
SAU Community

Recommended Posts

Hey kids,

Was at the track and revving 2nd a bit and went to put it fast into 3rd and heard a big crunch followed by it seeming in neutral. Took it out of 3rd n back in and again was like neutral. I got all my others gears just lost 3rd and im left with a bit of pop corn sounding noises while I nursed it back.

who knows there gear box’s?

What models are interchangeable and is it only gtr box’s I can use? I doubt ill put something else in but just food for thought.

Mines a 91 R32 GTR so it’s a push clutch setup.

am i better off getting another 2nd hand box or rebuilding? the snycros were also a lil worn in my box and gave the odd crunch down changing into 4th now and then but other than that it was pretty good.

Edited by Inline 6
Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

You have the same gbox as me

I'll sell u my gearset + synchros once Ive fitted the 33 gtr s2 box ;P (if u want it)

-D

Hey kids,

Was at the track and revving 2nd a bit and went to put it fast into 3rd and heard a big crunch followed by it seeming in neutral. Took it out of 3rd n back in and again was like neutral. I got all my others gears just lost 3rd and im left with a bit of pop corn sounding noises while I nursed it back.

who knows there gear box's?

What models are interchangeable and is it only gtr box's I can use? I doubt ill put something else in but just food for thought.

Mines a 91 R32 GTR so it's a push clutch setup.

am i better off getting another 2nd hand box or rebuilding? the snycros were also a lil worn in my box and gave the odd crunch down changing into 4th now and then but other than that it was pretty good.

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063742
Share on other sites

You can use 33GTR box's you just need to turn the slave cylinder around and also swap another part where the input shaft is. I had a 33GTR box in my car but blew the transfer case so put the 32 box back in.

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063750
Share on other sites

For some reason my browser is acting wiggy, I deleted my win7 beta installation and installed win7 ultimate final retail, and for some reason the version of firefox i'm using wont let me do what i want to do... and tbh im still installing software so i think its something ill look at later...its annoying the hell out of me tho

-D

could get a 25 box there stronger than 32's and don't have the 3rd gear failure that plagued the 32

EDIT

Ben - why are you now quoting people below your response

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063766
Share on other sites

granny shifting not double clutchin' like ya should be :)

lol Vu, you don't double clutch (it's not a truck with a crash box), you flat change if you can trust your synchros and gear selectors.......I wouldn't on a 5 speed GTR box though :):no:

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063772
Share on other sites

really Chad

there is basically only a couple of gearboxes nissan built RB20, RB25push RB25Pull seen in late model 32 and all 33 GTR's some late model s2 33's might have the pull type gear box too

If you said 25GTS4 box it would have made more sense.

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063785
Share on other sites

Os Giken kits are also very good, strong gears at a more racing biased ratio

That's what I'd get if I blew the 33 gtr box...

-D

i've seen 2nd hand GTR boxes going for $600-$1500 second hand.

to rebuild a gearbox with nissan parts is around the $4k mark

or go PPG for around $6-10K (like i did)

my 2 cents.

Nigel.

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063832
Share on other sites

i've seen 2nd hand GTR boxes going for $600-$1500 second hand.

to rebuild a gearbox with nissan parts is around the $4k mark

or go PPG for around $6-10K (like i did)

cheers nigel, was the 6-10k with labour to fix it? i reckon i can get a few boys to help me rip it out n put it in so hopefully thatll save me a little bit :)

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5063842
Share on other sites

Dan - just got off the phone to Shaun at boostworx to see 2 things that my advice of any gearbox will be able to be mated in albeit a rebuild of input shafts and 2 could he rebuild your and that he can your looking at just $1000-1200 just to get the box in and out and labour while its out plus parts :action-smiley-069: not too bad give him a ring if you want any advice

Link to comment
https://www.sau.com.au/forums/topic/306274-broken-gear-box/#findComment-5064236
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...