Jump to content
SAU Community

Recommended Posts

Hey guys,

So I was driving to Victor Harbor one day when a puff of steam/smoke came out of my bonnet on the left side. I pulled over and had a quick look, car was still running fine. Later I tried turning on my air-con and found out it was completely dead- and this is why...

Image link: (doesn't want to display here for some reason) http://www.overclockers.com.au/pix/image.p...d=mvjak&t=1

The pipe that's been blown open (no idea how) seems to be made of plastic, with some sort of silver insulation or something over it... does anyone know what that pipe is called? From general web searches, all I've seem to find is 'low side pipe (from evaporator)' and stuff like that, makes it a bit hard to track down a replacement. If anyone can let me know what sort of material it is, the name of it, or even better - where I could grab a replacement then that'd be awesome.

Cheers!

post-65208-1265683039_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/307497-air-con-problem-r33/
Share on other sites

that is a rubber hose with the aluminium over it to protect from heat .it is joined by crimped joins onto the aluminium ends.must of gotten too hot and blew out,should be able to get one from a wreckers or somewhere like that.not sure if nissan would still sell them, be worth ringing them at least ,or maybe you can get the hose replaced by a hydraulic hose fitter/maker.. :P

it looks like that hose is awfully close to the dump pipe & turbo, and it has slowly burnt (and the hose is probably as old as the car too, so likely to have tarnished slowly over time).

I'm no expert, but it's probably pressurised aircon/refrigeration gas that you lost through that split in the hose while you were on your way to Victor.

if you want a genuine part - go into a Nissan dealer - e.g. Lakeside Nissan on Main North Rd near Mawson Lakes. They'll get the replacement hose for you easily. Although once you replace it, you may want to look at shielding it with better insulation, or modifying it to sit a touch further away from your dump pipe & turbo.

Since you say the aircon is completely dead now though, the problem may be greater. hope you get it sorted before the rest of summer mate :P

Thanks heaps for the feedback and quick replies.

The photo I've taken is probably a little deceptive, as the blown hose sits further down than it looks, but even with that said I guess it is pretty close. It definitely is burnt though, so I guess that's the reason it finally blew - I just would have hoped/expected to notice the carbon on the hose earlier! Hopefully the gasket is fine, but if I notice anything (or I see it's being burnt again) after I get a new hose I'll look into it.

I think you're right too, Luciano - there was a pressurised gas-like hiss when the steam/smoke came out, so I was silly not to pick up on it straight after it happened. Thankfully, the climate control (LCD screen, fan etc) still works and everything, I probably just exaggerated a bit when I said it was completely dead! The car revs a bit higher when I press the A/C button, so I'm pretty certain it's just that cheeky hose.

I'm just spewing because I've got a 6 or so hour drive to Tumby Bay on Thursday... oh well, windows down and I'll be alright.

Cheers again

Edited by Daleet

I rang up the Nissan dealer on Unley Road (as it's closer to me), and they quoted me $344 + GST + 2 weeks on the part as it's coming from Japan. Youch! I haven't ordered yet (insufficient funds), but at least I know the figures.

Does anyone know of some decent wreckers that might stock some old R33 parts??

Hmmm, looks like until I get that hose replaced, I'll just have to put up with being a crispy critter.

You wouldn't be silly enough to replace the hose without first getting some heat shields on the turbo and that dump would you????

And switching on the compressor, not too smart. It will try to ingest the remains of your hose and assorted crap.

Aircon internals must be surgically clean.

Yeah that looks like the one I'm after. How much do you want for it? Though it looks a bit corroded or something... it's not clogged up or anything?

yeah its been siting around for a while but its clean inside, if you were in wa id say just come and get it , aall id want for it is enough to cover the postage , probably 20 or 30 bucks, im not going to use it again, its up to you, pm me or whatever,

You wouldn't be silly enough to replace the hose without first getting some heat shields on the turbo and that dump would you????

And switching on the compressor, not too smart. It will try to ingest the remains of your hose and assorted crap.

Aircon internals must be surgically clean.

Yeah it's unfortunate that I didn't see the hose had blown, so when I pressed the A/C button it's not like I knew it was a bad move. Depends on the price of heat shields etc too, if I put on a new hose and there's no burning, then I won't worry. If there is, I'll chase some up. Being a student means I don't have as much flexibility with my cash as I'd like. Ideally, I would get new/genuine parts from the dealer, but economically I just can't.

yeah its been siting around for a while but its clean inside, if you were in wa id say just come and get it , aall id want for it is enough to cover the postage , probably 20 or 30 bucks, im not going to use it again, its up to you, pm me or whatever,

No worries dude, I'll pm you.

EDIT: Craig, I can't pm yet as I haven't had a total of 10 posts. I'll pm tomorrow when I've got some time to comment on a few other threads. Just got back from a big weekend away, so too tired to do so now.

Edited by Daleet
  • 2 weeks later...

Got my mate who actually knows what he's doing (unlike myself) to give me a hand, and voila! Fixed. As you can see, I bought a roll of head shield and wrapped it over the dump pipe. Hopefully that does the job!

Air Con Fixed

post-65208-1267485903_thumb.jpg

Though it'll be good to get a really hot day so I can really give it a whirl.

Edited by Daleet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm an idiot, my intercooler is rated for 1000hp. I had clicked on the wrong product. Knowing the delta P would be nice, but I'm doubtful I'll do it. Now as for an EMAP, that would be great and I'll get around to it eventually but from my findings in my last post, I'm considering a turbo swap now. 
    • You sir, big win tonight. Precision never supplied compressor maps in the past and Idk when they started, but it seems they only offer for a few of the older gen2's which is exactly what I have. I punched in some numbers and seem to have gone with the wrong turbo. 600-700whp isn't in the most efficient area and is close to the choke line. 800whp is well off the map. Punching the numbers into a 68mm gen2 turbo map is bang on in the center. Here I was thinking going smaller would shift the power band down, but in reality it would just make it so much worst due to my rev limit. I would have never thought. 
    • Increasing overlap will bring the torque down earlier (and make your idle sound sick lol). Worth a shot (if you dyno time) to experience a bit (providing you are confident your valves won't kiss your pistons). Is to just take off 5 degrees across the boosted area of the map, and then retard the exhaust cam let's say, 3 degrees at a time and then overlay all the runs with VCT on all the way and VCT off as soon as you make positive pressure. Ideally you would have a total of 6x overlays to looks at 0 exhaust & VCT off once manifold pressure is +ve 0 exhaust & VCT on all the way -5 exhaust & VCT off once manifold pressure is +ve -5 exhaust & VCT on all the way -10 exhaust & VCT off once manifold pressure is +ve -10 exhaust & VCT on all the way Just leave your O2 wideband closed loop on for all of the boost area & RPM, and hopefully there isn't too much fuel correction needed and the Haltech is fast enough to compensate (I do this, then apply the correction to the main table). Getting that overlay data should give you a good indication of what to aim for.
    • So, my main limitation here is that the car does not have an oil pressure sensor by default, just a switch. As part of my tune I bought an oil pressure sensor upgrade so I now have access to oil pressure levels and logging rather than just the boolean behaviour of the switch but this means I need to use the tuning app to display this value. So, this rules out using any other app on the iPad. The app will also flash when pressure drops which is a nice feature. I have replaced the centre screen with an Android one, which is awesome for Android Auto, but I think it might be too far away and out of my line of sight. I might add some gauges to it this weekend and just see. I guess if its just temp and oil pressure I can make them massive! 🤣  
    • This is what the look like normally. Except we only got the 2 doors locally
×
×
  • Create New...