Jump to content
SAU Community

Recommended Posts

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.

post-70816-1265935805_thumb.jpg

post-70816-1265936129_thumb.jpg

post-70816-1265936152_thumb.jpg

post-70816-1265936179_thumb.jpg

post-70816-1265936208_thumb.jpg

post-70816-1265936296_thumb.jpg

post-70816-1265936323_thumb.jpg

post-70816-1265936351_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/307915-r32-gtr-1990-un-reg-15500-neg/
Share on other sites

so this has after market turbos, injectors, built engine and a standard ecu?

somebody spent 10k+ on the engine, turbos and injectors, but couldn't be farked spending 1k on a computer?

got any receipts to prove build?

Yeah, i hear what your saying, the ecu should have definatly been put in, but the standard on has been chipped and re-mapped. sorry the only receipt i have for the mods is for the twin plate clutch, i've only been told from the previous owners about all the mods.

sorry i couldn't tell you more.

cheers mark.

  • 2 weeks later...

yeh right - bog standard!

Location: IPSWICH

Reason for Selling: CAN'T AFFORD TO OWN IT, AND NEED THE CASH

Asking Price: $15500 NEG

Contact Info: MARK ELLIS 0412993434 0732828882

Extra Information:

THE CAR IS ABOUT TO RUN OUT OF REGO SO I WANT TO SELL IT UNREGISTERED, SOME MODS INCLUDE: STRAIGHT CUT GEAR BOX WITH SHORT SHIFTER, CUSTOM BUILT TWIN PLATE CLUTCH CAPABLE OF 1000HP, FORGED ENGINE REBUILD, MILD CAMS, HKS GT 2540 ROLLER BEARING TURBOS, AFTERMARKET INJECTOR, N1 OIL PUMP, FRONT AND REAR STRUT BRACES, NISMO 360KM/H DASH. THE BODY IS IN PRETTY GOOD CONDITION WITH GOOD PAINT AND ONLY A FEW LITTLE DINTS AND SCRATCHES FROM THE PREVIOUS OWNER.

THE AIR FLOW METERS HAVE SEEN BETTER DAYS AND THE CAR COULD DO WITH A DECENT TUNE AS IT STILL HAS THE STANDARD ECU. THE PREVIOUS OWNER SAID IT USED TO MAKE 600HP SO MAYBE WITH AN AFTER MARKET ECU AND NEW AFM'S IT SHOULD BE A LITTLE ROCKET.

IT STILL HAS STOCK SUSPENSION AND THE FRONT SUSPENSION SQUEAKS A LITTLE BIT, THE WHEELS ARE IN NOT SO GOOD CONDITION WITH SOME BATTLE SCARS ON THEM FROM WHEN THE LAST OWNER HAD A FIGHT WITH A GUTTER IN THE CAR, LOL. AND THE CAR SOME TIMES TRACKS ON THE ROAD WHEN THE ROAD SURFACE IS UNEVEN, IV'E BEEN TOLD IT DUE TO THE OFF SET OF THE WHEELS.

THE INTERIOR IS IN GOOD CONDITION CONCIDERING TO AGE OF THE CAR BUT THE DRIVERS SEAT HAS A LITTLE WEAR ON THE SIDE OF IT UNDER THE SEAT COVER.

IF YOU HAVE ANY QUESTIONS PLEASE DON'T HESITATE TO CALL ME OR MESSAGE ME.



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...