Jump to content
SAU Community

Recommended Posts

Picked up a fresh import 34 GTT last week, now its in townsville, just wondering if anyone knows if the crushing humidity here (generally 75 to 95% all the time) has an effect on the performance or fuel efficiency? If so to what extent? I assume the car is made for cooler and less humid japan, hence the small intercooler so if anyone can help please do. Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/308138-high-humidity-vs-turbo/
Share on other sites

yeah its common knowledge that temperature would affect performance, humidity on the other hand i am unsure

just use good fuel and ensure the engine is in good working order

the intercooler is not on the factory setup to suit the climate, it is there to reduce heat from the intake charge from the turbocharger. the intercooler is only as a good as the ambient air temperature

yeah its common knowledge that temperature would affect performance, humidity on the other hand i am unsure

just use good fuel and ensure the engine is in good working order

the intercooler is not on the factory setup to suit the climate, it is there to reduce heat from the intake charge from the turbocharger. the intercooler is only as a good as the ambient air temperature

Yeah i know temp is an issue, but cant figure out the humidity, the air is so thick and heavy, i know its not the same but breathing while running here is so much harder than in low humidity i thought maybe it could have a similar effect on a car.

it should be ok, i mean there isn't much you can do it about - ie you can't negate humidity

Yeah true,but i noticed in 1/4 mile time cards humidity is listed as a factor alongside temp, wind etc.

Maybe slightly worse for wind resistance or something, im out of ideas haha.

Thats why I live in Tassie. It's cold ALL the time! ha ha ha. Good crisp air is awsome for power production and throttle response.

It would be hard to know what effects humidity (if any) would have in such a warm climate.

If your worried about intake temps and humidity, throw the car on a chassis dyno in summer and give it a good work out. Then log the coolant, oil and air intake temps as well as afr's/detonation.

If your so inclined- install a larger intercooler and oil cooler with a thermostat. Also if the car is auto, invest in a trans cooler if your going to give the car a hard time.

Edited by XRATED
Thats why I live in Tassie. It's cold ALL the time! ha ha ha. Good crisp air is awsome for power production and throttle response.

If your worried about intake temps and humidity, throw the car on a chassis dyno in summer and give it a good work out. Then log the coolant, oil and air intake temps as well as afr's/detonation.

If your so inclined- install a larger intercooler and oil cooler with a thermostat.

May try that actually, will have to wait until the end of the wet season for a cool day with lower humidity but.Yeah bigger intercooler is on the to do list lol

May try that actually, will have to wait until the end of the wet season for a cool day with lower humidity but.Yeah bigger intercooler is on the to do list lol

Try that.... moving to Tassie, Good plann! ha ha ha.

If your worried about the heat/humidity throw the car on the dyno on the hottest- most humid day you can...

Yeah I know... ha ha ha

I was stationed there for a while. PT on mondays after a sunday session is not fun in 45deg heat and 95% humidity.

Tell me about it, i still have 2 1/2 years here haha, thats what made me think about the car, it affected my performace so much i thought maybe the principal would transfer over?call me crazy

The effect of Humidity on engine performance is not worth considering.

Temperature and air pressure are the main factors that effect air density, which in turn will dictate engine performance. Every degree of temperature increase is equivalent to going up in elevation by 120 feet. A drop in pressure by 1 HPa has the effect of going up in elevation by 30 feet.

A turbo charged car is going to be less effected by pressure changes than a naturally aspirated one, because air is being forced into the manifold at greater than ambient. Temperature is the main thing that will reduce a turbo charged cars performance.

In Aviation we doing not factor Humidity into performance calculations because it is negligible.

The effect of Humidity on engine performance is not worth considering.

Temperature and air pressure are the main factors that effect air density, which in turn will dictate engine performance. Every degree of temperature increase is equivalent to going up in elevation by 120 feet. A drop in pressure by 1 HPa has the effect of going up in elevation by 30 feet.

A turbo charged car is going to be less effected by pressure changes than a naturally aspirated one, because air is being forced into the manifold at greater than ambient. Temperature is the main thing that will reduce a turbo charged cars performance.

In Aviation we doing not factor Humidity into performance calculations because it is negligible.

Sounds pretty definitive, thanks mate.

Humidity does have an effect on any engine.

Those water parrticles are taking up space, oxygen space. The greater the humidity, the less air your engine has to breathe.

Why do you think a dyno needs input from humidty, inlet air temp, etc etc?

It's all compensated for in the dyno's computer package.

Give Trent or someone who does a lot of tuning a PM.

Humidity does have an effect on any engine.

Those water parrticles are taking up space, oxygen space. The greater the humidity, the less air your engine has to breathe.

Why do you think a dyno needs input from humidty, inlet air temp, etc etc?

It's all compensated for in the dyno's computer package.

Give Trent or someone who does a lot of tuning a PM.

Those are the lines i was thinking along.Who is trent?

Yeah the humidity up here is very annoying, walk outside for five minutes and feels like you have walked into a shower. I notice a huge difference from day time to night time driving here, mixture of humidity and air temperature definetely has a very noticable effect.

Edited by PM-R33
Yeah the humidity up here is very annoying, walk outside for five minutes and feels like you have walked into a shower. I notice a huge difference from day time to night time driving here, mixture of humidity and air temperature definetely has a very noticable effect.

Yeah i notice that too, but night here is still hot and humid like a rainy hot day anywhere else hey.now its crazy with all this rain its just getting worse.

Yeah its not the best place for enjoying a modified car. Hopefully if all goes through i should have my car out doing circuit work this year. Really worried about water and oil temps going throgh the roof though. Most of my "spirited driving" is done at night time where i never have an issue with temps, day time however is a bit of an unknown.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...