Jump to content
SAU Community

Damo's R32 Gts-r, On Going Project Fun Car. History And Use Full Info


Recommended Posts

Hey damo, just stuff the sound shield box full of fire blankets... help cut the ressonance down.

Dude--- sucks about the turbo!

You know, I recon a nice set of red top rb20 rocker covers in crincle red would look good toooo.... :thumbsup:

just like fire blankets from bunnings or alike?

id profer to sell the cam covers at the moment but if it sitts in my shed long enough it ends up pn the car.

love it!

thanks. im happy with the way it looks at the moment. i have a picture taken from the same place same angle from my first basky day and the car has never matched it looks wise untill now i dont think.

  • 1 month later...

nearly 2 months since i updated this.

i went off and done targa with Sav Man and that resulted in my daily 4 door being a donor car so post targa we had to fix that up. the result was just a tidy up with about 20 cans of degreser used in the engine bay and a few new parts thrown at it. like split dump pipe, new ac compressor and condenser fan, strut brace, clutch pressure plate. really just shit we had laying around. i also scored some Panasport rims, gts (or N1) headlights, type M areo front bar and shaved boot lid. ill throw some pics up of it once its looking clean and tidy again.

i had some time to ponder turbo options but to see what elce needs to be fixed on it ive borrowed a mates gt3071r. ive had a few goes at fitting it as it wasnt a straight swap as the core of the turbo is stuck in a different position to mine which has ment a new oil drain had to be made and slight modifications to the manifold. id just about given up on the car over the past few weeks but i had a look through here tonight and got my thinking cap on and came to some practical solutions.

this car will be going into storage untill late 2011 after this event so i wanted to get one under its belt before parking it. i am doing a club day at my local track where i hope to brake my PB. the car is getting dynoed on thursday so between now and the 4th june i should get up some more shots of some revised mods.

a future outlook would be one of the new garrett GTX series turbos and maybe some half bread fuel. not e85 just yet.

I heard you sold the car to fund a float at this years gay and lesbian mardi gras!

Cats out now. i was going to suprise you.

Car runs again. good old RB first hit of the key and fired up.

its now 3071R equiped. s bit quieter in the cab and blitz SBC instaled.

Results = tomorow.

car now sits on 295 18s dunlop D03Gs rear.

thanks to bens help we massaged the guards out just enough to fit them. they will have to be repainted thoe as the paint didnt want to stretch as far as the metal.

will try and get pics up as soon as i fix my fing camera/phone.

just like fire blankets from bunnings or alike?

id profer to sell the cam covers at the moment but if it sitts in my shed long enough it ends up pn the car.

Yeah mate, like the ones you buy for your kitchen... I've used them in mufflers as packing... good stuff.

-You know you want to spray those rb20 covers crinckle red and bang em on!

I'm loving the gtr intake, I think that'll be my next step once I've finished with the Trust T67 set up.

What's the next event?

Cheers

Justin

Wow, new turbo sh1ts on the old one!

I had a quick look but gave up searching, what turbo was the old one?

it was an older series turbo around the 3082r size. massive front wheel. i didnt get to realy drive it to see what it was like but it was laggy

the new one is a 3071r off a mates rb20. mine made less power with similar boost because it wont accept any ignition timing. e85 will fix this

ill be after somthing in the middle i think.

justin- the cover have gone sorry mate. im about to have a big clean up of parts i no longer need.

i got a fire blancket thanks. made a huge difference to noise.

there is a club day im entering this weekend.

yell out if you start the 25-GTR intske. ill tell you all you need to know.

Where's the club day?

I'll see how the greddy/vh45 tb combo goes with the T67. I have a couple of spare GTR intake sides in stock, as I have a greddy mani, oversize tb's and milled out injector mani for the GTR... 6 x 48mm throttle bodies- oooo yeah! ha ha ah.

Do you have a valley cover to suit the red cover rb20 rocker covers???

Cheers

J.

Where's the club day?

I'll see how the greddy/vh45 tb combo goes with the T67. I have a couple of spare GTR intake sides in stock, as I have a greddy mani, oversize tb's and milled out injector mani for the GTR... 6 x 48mm throttle bodies- oooo yeah! ha ha ah.

Do you have a valley cover to suit the red cover rb20 rocker covers???

Cheers

J.

symmons saturday like ben said.

you going top come up and cheere me on?

no valley cover but i do have 1 or 2 instock.

what you have intake wise will do the job for the amount of effort needed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...