Jump to content
SAU Community

Recommended Posts

OK scenario... 10" wide guards, and only 9" wide rims, meaning rims woul be an inch inside the guard.

Firstly can you use spacers to being the wheel out to sit flush with the guards

and secondly, how far out can it go, ie can it be brought out about 2 inches or so? (Trying to fit regular GTSt rims under a GTR front guard without having to change rims.)

Thanx 4 ur help

I have used spacers in the past with great results. The car felt much more stable in corners too.

Just be sure to get HUB CENTRIC spacers. These are designed with an extra little lip which make them safe to use. The spacers I bought were very expensive, german H&R hub centric 15mm fronts and 20mm rear. Car looks fat!

big_spacer.jpg

Hmm its either that or I buy a set of Work Rims for a GTR... hmmm I'm lookin at bringing them out about 20 to 24 mm so dunno if its worth the hassle.

  • 6 months later...

Just reviving this thread as I am interested in getting 5-10mm spacers for my GT-R to make it LOOK that much tougher.

A) I know spacers are defectable but they'd never look there. Spacers don't tend to stand out too much visually.

B) So long as they're hub-centric and also bolted on to the hub they're safe.

C) They won't necessarily stuff up your geometry. In fact, according to tests with spacers in OPTION Magazine they will make your lap times FASTER. Yes. I have the magazine where they test different width spacers on track and record their lap times and times were reduced with spacers on. Now that's some good real world testing which cleared things up for me as I know my last car felt flatter through corners with spacers on.

You are limited to an extra 20 or 25mm (can't remember which) of track width, which is centre of tyre to centre of tyre, not outer to outer, but are also limited tyre width wise.

Increasing the track increases your scrub radius which puts a little extra load on the steering rack, but shouldn't break anything, and certainly won't upset suspension angles

I must not be drinking as much as i used to, once upon a time i would never have remembered something from thsi long ago :( See here for what may fix your woes provided you dont co crazy with track increase
Why are we always lurking in the same threads Roy? I can look at a topic and bet myself that Roy will be there soon or has already been and I always win :rofl:. Wish powerball was that easy.

Anyway that linked thread also discusses welding of wheels which is covered under Vic Roads website and is legal according to the standards, but back to topic, blocks are legal, spacers are not (the not bolted in things) as they limit the thread capture for the nut and a whole heap of other things us engineers talk about to confuse people.

R32 GTR's definitely need about 10mm per side as they look silly on standard wheels and all that guard overhang.

Why are we always lurking in the same threads Roy? I can look at a topic and bet myself that Roy will be there soon or has already been and I always win :). Wish powerball was that easy  

LOL, i think its because we happen to think along similar lines and share same approach to modding a car...sorry to say Geoff but you may need help, the kind you can only get from a prefessional, ive already seen a few and there is no helping me, but we must hold onto our faith :rofl:

Im all set to try some spacers if my new but wider track rims dont fit all that well :(

I'm looking for about 25mm spacers for my R34 GTR rims on my R33 GTR, they need more offset :D

$500 bucks for jap bolt on ones... can anyone give me some advice? can i get them cheaper/better?

Hey man i also had to get bigger spacers becasue of my wheel size on my cef, 17x9.5s. Yeah they stick ou like 5mm. :wassup:

cost me 200 bux for a pair of 21mm spacers. Here in sydney.

U have to send em your rim thou to match. (since your in vic)

Name: Neale Wheels - (02) 9642 1002

Also had to get longer wheels studs as well. 75mm size for 6 bux each as well.

Let me know if u still want to get some done. As i know of a few places to look for in vic.

ceffo.

your hubs and wheel stubs and studs are usual engineered for a certain amount of stress .. hence the max of offset ppl use and what wheels are manufactured to

.... there's a point where u have too much offset and your suspension suffers greatly ... look at buying wheels with more dish .. like a +9mm offset .. as standard is about +27mm or is it negative .. i forget ...offset your rims .. not your studs

spacers are a no no ...generating more lateral stress on your stub and wheel bearing .... hence shorter life span in that regard.

MT

  • 4 months later...

time to do some digging out of an old thread...

there is a guy that has 18x8 350z track rims - I'm considering whether they'd be good for the GTR with 20mm spacers as road wheels.

What's the widest on a 8" rim? 235 I'm assuming

Geoff / Roy - what do you think of this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...