Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

So basically you are claming Admin edited you post. I have nothing to hide here.

Here are the log extracts from that time, these logs do not get edited/purged for the purposes of auditability.

R31Nismoid Applied trash can for deleted post Forced Induction Performance Topic ID: 308953 25 Feb 2010, 11:49 PM

R31Nismoid Applied trash can for deleted post Victoria Topic ID: 309697 25 Feb 2010, 11:29 PM

R31Nismoid Locked a topic Victoria Topic ID: 234907 25 Feb 2010, 11:26 PM

Blitz Deleted a topic Moved Topic ID: 309211 25 Feb 2010, 11:03 PM

Utterly impossible for what you are "claming", to have occured.

My advice to you is simple.

Refrain from making insinuations & accusations against myself that are factually incorrect in future or you will feel the "abuse of power" swiftly, and sharply.

If you've posted something incorrectly, that is your problem. However to then claim Admin is abusing power and edting posts... grow up.

The only person guilty here is you.

So basically you are claming Admin edited you post. I have nothing to hide here.

Here are the log extracts from that time, these logs do not get edited/purged for the purposes of auditability.

R31Nismoid Applied trash can for deleted post Forced Induction Performance Topic ID: 308953 25 Feb 2010, 11:49 PM

R31Nismoid Applied trash can for deleted post Victoria Topic ID: 309697 25 Feb 2010, 11:29 PM

R31Nismoid Locked a topic Victoria Topic ID: 234907 25 Feb 2010, 11:26 PM

Blitz Deleted a topic Moved Topic ID: 309211 25 Feb 2010, 11:03 PM

Utterly impossible for what you are "claming", to have occured.

My advice to you is simple.

Refrain from making insinuations & accusations against myself that are factually incorrect in future or you will feel the "abuse of power" swiftly, and sharply.

If you've posted something incorrectly, that is your problem. However to then claim Admin is abusing power and edting posts... grow up.

The only person guilty here is you.

now this is a lesson for you when you make dumb remarks on peoples posts and piss them off for no reason you now know how it feels,

you have been served!

you where a very easy target.

be nice to people or drop all your honor badges,you represent sau everytime you post.

I've got a 340hp set-up!

Hi-Flow Turbo runnin @ 17psi full boost by 3600rpm.

will the Std GReddy Type R still give surge at low pressures.

Dont want no Surge at all, not even a little bit.

Cheers

As a matter of fact I hate the wanker BOV noise too - but thats just me.

Answering your question thought the BEST bov for your application that will reduce surge is without doubt a $50 plastic bosch BOV - Not sure why Porsche use them in theirr GT2's or why BMW use them in the 335ci's maybe because they open with about 12" of vacuum as a proper BOV should.

You could just leave your fully hektic wanker valve on there to pull the chicks and then use an addtional bosch valve to do what a BOV is meant to do.

now this is a lesson for you when you make dumb remarks on peoples posts and piss them off for no reason you now know how it feels,

you have been served!

you where a very easy target.

be nice to people or drop all your honor badges,you represent sau everytime you post.

C ya.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...