Jump to content
SAU Community

Recommended Posts

Hi everyone!

For sale I have the following parts located in Sydney

RIPS Plenum to suit RB25: I never actually fitted this to any of my cars while they were running but it is in good condition and the intake flanges matches the rb25 gasket. I am unsure if there is a difference between NA and Turbo manifolds. I have a spare throttle body here too which came with it you can have

$450 SOLD

post-26632-1267336844_thumb.jpg

post-26632-1267336855_thumb.jpg

post-26632-1267336866_thumb.jpg

post-26632-1267336878_thumb.jpg

R33 Strut tower bar

$50

post-26632-1267336938_thumb.jpg

RB26 Cam covers and valley cover in QM1 white

$300

post-26632-1266986175_thumb.jpg

RB26 Front timing cover in black- Have 2

$50

Z32 AFM and plug

$SOLD

Nismo 750cc injectors for rb25 on rail

$SOLD

Genuine Greddy intercooler kit inc alloy piping and cooler, cold side pipe has trust style BOV

$400

Apexi Power fc for r33 GTST with hand controller

$SOLD

R33 GTR turbos with standard dumps- taken off the new motor I bought for my race car. approx 60 000kms of standard boost

$500

post-26632-1267336979_thumb.jpg

post-26632-1267337000_thumb.jpg

Standard coilpacks from the r33 GTR motor

$50

Twin Turbo pipe for RB26x 2 sets

$SOLD

RB26 exhaust manifolds

$150

Just Jap Rear camber arms- brand new never fitted

$160 pics further down

Oil cooler kit

$100

More parts and pics if you scroll down

some pics:

Power FC for R33 GTST with hand controller

post-26632-1267330858_thumb.jpg

Z32 and plug

post-26632-1267330776_thumb.jpg

Nismo injectors on rb25det rail

post-26632-1267330675_thumb.jpg

all the mods were done around 10 000km ago so egverything is in top condition I need to degrease the fuel rail but thats about it.

located in glenfield in sydney.

here are some pics of the 26 timing cover, i have 2 for sale

post-26632-1267335055_thumb.jpg

also the remaining twin turbo pipes and rb26 manifolds

post-26632-1267335209_thumb.jpg

some brand new just jap r33/S14 rear camber arms $150

post-26632-1267335302_thumb.jpg

Just jap oil cooler kit $SOLD

post-26632-1267335382_thumb.jpg

Factory 32 GTR intercooler rubber pipesx4- $50

Pipe to shorten intake piping and get it out of the way for a nice turbo setup $40

note it is currently painted silver.

post-26632-1267335536_thumb.jpg

post-26632-1267335748_thumb.jpg

more stuff to come keep checking back

I will get some pics when its not raining, the cooler is still on the car atm, i have to take the greddy plenum off to put the factory cooler on, and i'm not able to pull it off til next weekend unless someone wants it urgently.

It is a spec m kit i bought brand new, with a bov installed on the hot side under the guard. I have had it for a few years but the car has only done 10 000 k's.

does have a tps on it which plugs straight in. I'll take a pic of the throttle body on the weekend im not sure which type it is. Just came with the plenum lol but it is a nissan part

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...