Jump to content
SAU Community

Recommended Posts

Hi guys, I have serious trouble getting up driveways and it's been confirmed now that only one week is spinning :P

what are my options, do I get this one rebuilt, second hand R34GTT, I also heard an S15 diff is the same, what about a R34 GTR rear diff?

how much better is a 1.5 turn, and is it a worthy upgrade, i don't do any drifting or anything like that?

thanks for your help

cheers

chris

Link to comment
https://www.sau.com.au/forums/topic/309966-r34-gtt-diff-farked/
Share on other sites

I wouldn't say it's, farked, torsen diffs (in S15/R34 GT-t) do that when there's one wheel in the air.

yup my car does it as well. I believe its normal for a stock r34 gt-t diff. Mine still spins up two wheels with both wheels on the road. if it doesnt spin both wheels when they are both on the road then your lsd is fcked.

i think its just an issue with the limited suspension travel.

I can also confirm the driveway thing. It's a catch 22. You set your shocks to soft and then you drag your body kit.

On the topic of interchanging centers, I have a cusco 2 way for an S13 R200. Is it true this will fit my R34 housing?

ewww weldies!

once you go torsen or mechanical, you won't like weldies anymore... !

and yes like I said before, you're diff isn't stuffed, it's a marvellous diff, heaps better than the junk in R33 R32 GTS-ts

Put it on the track and you'll know what I mean when you hop into a R33 with a VLSD

  • 2 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...