Jump to content
SAU Community

Recommended Posts

1. use common sense

2. search

the information is readily available on the forum, you can use any RB series powerfc. obviously you cant easily get one from another car and get it to work.

because all RB's are fairly similar electronically and the powerfc has the ability to be tuned, you can get a powerfc from any RB powered skyline to run any other. BUT, only the R33 and R34 powerfc will do the job PROPERLY. the R34 has variable cam timing, only the R33 and R34 powerfc has the components inside to run that. using a RB26 powerfc is cheaper but you need to redo your wirring harness and you lose control of the VCT.

the VCT (variable cam timing) is makes the car alot more powerful down low, without VCT the car will feel alot laggier unless you get a really good tuner to tune it out with adjustable cam gears.

the forum is FULL of information, more than you will find by asking questions and usually you can ask your question in a topic that is already going.

If you have any questions about how to search, please ask, if not I have armed you already with more than I should have.

Goodluck

1. use common sense 2. search the information is readily available on the forum, you can use any RB series powerfc. obviously you cant easily get one from another car and get it to work. because all RB's are fairly similar electronically and the powerfc has the ability to be tuned, you can get a powerfc from any RB powered skyline to run any other. BUT, only the R33 and R34 powerfc will do the job PROPERLY. the R34 has variable cam timing, only the R33 and R34 powerfc has the components inside to run that. using a RB26 powerfc is cheaper but you need to redo your wirring harness and you lose control of the VCT. the VCT (variable cam timing) is makes the car alot more powerful down low, without VCT the car will feel alot laggier unless you get a really good tuner to tune it out with adjustable cam gears. the forum is FULL of information, more than you will find by asking questions and usually you can ask your question in a topic that is already going. If you have any questions about how to search, please ask, if not I have armed you already with more than I should have. Goodluck
THANKS FOR INFORMATION. NORMALY I WOULD DO AN EXTENSIVE SEARCH BUT WHEN I TRYED ALL I GOT WAS A POST ABOUT STEP 1 AND STEP 2 ON UPGRADING. IM ON MY PHONE AT WORK SO THE PAGE LOAD TIME IS LIKE 10MIN.S SO I FIGURED ASKING THE QUESTION WOULD BE QUICKER THAN TRYING TO SEARCH WITTH THE SLOW PHONE SPEED
When you get home, follow these two links http://www.skylinesaustralia.com/forums/Fa...req-t64201.html http://paulr33.skylinesaustralia.com/docs/...erfc-faq.htm#55 just about everything you could want to know about powerFC
THANKS MATE WILL  DO (ONLY FOUR HOURS OF THIS SHIFT LEFT GOTTA LOVE NIGHT SHIFT).
lol better hope ur getting paid well, im going 2 bed :blush:
YEAH PAY.S GOOD BUT THE WIFES PUT HER FOOT DOWN AND SAID SHE LET ME GET THE CAR I WANT BUT NO UPGRADES TO THE CAR TILL SHE GETS THE UPGRADES TO THE HOUSE :D ONE DAY !!!!!! 

lol then buy the car with the upgrades already and tell her ur saving up for the house... "its not like i dont want to work on the house hun, afterall once im done i can work on the car too :D"

mediation, atleast they think so :blush:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...