Jump to content
SAU Community

Recommended Posts

Whats it supose to do???

edit

just done a search and hummmmmmm ok then if that can do half of what it says than im a china man

better off getting a neo or a safc or better still

Is there not anywhere in Australia that do generic stage one ECU remaps on an exchange basis?????

Edited by jjskyline79

HI all after hours apoun hours of research and pulling the ecu apart the item is a early version powermod piggy back system. After speaking to powermood.com.au i found there service to be excellent with them even sending me the wiring diagram and fitting instructions to the rb25det. well done to them it hard to find this level of help in an item bought off ebay in which they have no responsiblty for what so ever.

well installed the unit today. hmmmm... Car 1 me 0 installed it all and wont fire. ( i did use spade terminals and splicing connectors ) so will be firing up the soldering iron on the week end and have another go at it. Hopefully it was just a splice connection that was not making contact.

do you have someone that can even tune this system?

never heard of it, and i suspect most tuners will say the same thing

its probably more hassles than its worth honestly

i would have left it at that, cut your losses and buy something well known and locally supported

get a nistune
Good advice there. Nistune is readily available for Rrb25.

NOT

Track down a Z32 ECU, Get a Nis-Tune Board... Then off to the Tuner :D

We've done it to atleast 10x cars by now.

Just need the correct ECU No.

My two cents :down:

Edited by JDM_Spirit

There is a fair bit of support for the power mod system and it is the same distance away from were i live to power mod or nistune tuners. I am a sparky by trade and have some knowledge of how wiring should be done so i would rather just give it another go.

OK round 2 still didnt start but the bloke from powermood said to just run the powermod with out the input /output of the 120 degree senor ( this still just plugs into the normal ecu ). After that it runs so my question is what does the 120 degree sensor do ( i still have the 1 degree sensor inputted into the power mod ) Note this only required to be spliced into not cut .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...