Jump to content
SAU Community

Recommended Posts

Hmm, I'll have to see if i get my suspension sorted before this so i can have a run. Been wanting to come to the last couple but couldnt due to work.

Even if i dont run the car I'll come down with the camera and take some photos :P

Edited by stenve
  • Replies 199
  • Created
  • Last Reply

Top Posters In This Topic

Hmm, I'll have to see if i get my suspension sorted before this so i can have a run. Been wanting to come to the last couple but couldnt due to work.

Even if i dont run the car I'll come down with the camera and take some photos :)

Legend, hope all is fixed & you get a chance to run with us :)

first tune underway yesterday set on 1 bar of boost.

I had a miss when I hit full boost, due to the shit iridium 1.1mm gap. Was just blowing out the spark.

Now have .8mm pre-gapped copper plugs and runs smooth as.

Time for 2nd tune with 1.5bar boost and roughly 440hp at the treads.

bring on 120mph.

The air is getting nice as. Yeeoooowww.

Yes Gary-Yyeeessssssss, my first run in a colder month also. Am interested to see what my new goodies will do too-hopefully above 90hp this time-watch out Pear lol

hey guyskeen to com down whats the fee and if any one needs a lift down all the rifgt info would be great cheers guys

gremlin

hey guyskeen to com down whats the fee and if any one needs a lift down all the rifgt info would be great cheers guys

gremlin

Hi Mick,

Welcome to the forums.

All the details are in the first post of the topic.

If I'm lucky I'll be a spectator, might see you out there.

Hi Mick,

Welcome to the forums.

All the details are in the first post of the topic.

If I'm lucky I'll be a spectator, might see you out there.

cheers mate gonna go pay fee's tommorrow is it only just 50 all up or is there additional fee's on arrival to the strip

cheers mate gonna go pay fee's tommorrow is it only just 50 all up or is there additional fee's on arrival to the strip

No additional costs

if i'm only coming to watch do i pay to the account, or just when i get there?

also what are the rules on passengers on the run? (if anyones keen) i'm assuming just helmet and long sleeves/pants?

I wouldnt pay yet, each car gets a free spectator, so try and get in with someone who has no passenger when you arrive, if not, then pay at the gate. And they dont allow passengers.

No additional costs

I wouldnt pay yet, each car gets a free spectator, so try and get in with someone who has no passenger when you arrive, if not, then pay at the gate. And they dont allow passengers.

Yeah mate, just what he said :)

if i'm only coming to watch do i pay to the account, or just when i get there?

also what are the rules on passengers on the run? (if anyones keen) i'm assuming just helmet and long sleeves/pants?

well u can come with me and get in for free as i just confirmed i have the day off Woot :)

and i know the rules there are no passengers full stop

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...