Jump to content
SAU Community

Recommended Posts

No, just drive it gently (ie not high revs and full boost) for a few minutes before you get to your destination, or leave it running for a minute or 2 before you turn it off
spot on , no need for turb timers just stay with your car for a couple minutes
spot on , no need for turb timers just stay with your car for a couple minutes

Personally I love my turbo timer. They cost peanuts and worth every penny. When you stop your car the last thing you want to do is sit in it for 2 minutes twiddling your thumbs, especially after a late night, or arriving at a party, or anything really. Especially when you have passengers or family in the car, it's awkward to explain to them that you can't walk into the restaurant with them just yet because your car has to idle for 2 minutes. Don't be a tightass, buy one.

Also, make sure you check with your insurer and state regulations about the legality of having a turbo timer installed...

Good point, realistically they are not necessary. The last few minutes of your drive just take it easy & drive casually until your ready to park it.

Providing your not thrashing the pants until you turn the car off the air passing through engine bay & your oil pump pumping oil through the engine will be getting the temperature of the turbo down sufficiently.

If for some reason you are unable to do the said casual drive, then sitting at idle for a few minutes will achieve a similar result-however more temperature remains in engine bay due to it sitting still & still running-not enough to do damage on any of the 3 turbo'd cars I've owned & countless trucks I have driven by using this method.

Timers are handy tho-they can cover you for any unlisted situation above lol, but roadside laws can prevent their lawful use so best to spk to your local M.O.T about when & where they can be used if at all

For the record-I have one on my current car & use it as a back up

hope that helps

This question seems to come up a lot on here.

If you do a search you'll find several posts already....

I agree with most of the replies above saying the turbo timer is unnecessary. I had one on one of the 4 turbo cars I've owned and I must say its got to be the most annoying thing I ever did and it also makes you look like a tool IMO.

If you're on a public road etc its illegal to walk more than 1.5m from your car while its running, so its pretty much pointless. Not just that, but it will affect your immobiliser/alarm so your car is potentially not secure while the turbo timer is armed (depending on the setup). Mine was a pain in the neck because it messed with the central locking...which was tied into the alarm remote.

Secondly, you shouldn't need to run it for more than 1 minute after you stop (unless you've literally been redlining it up your street and then instantly pull over and stop). Most of the time if you're cruising along at the speed limit the turbo will be sitting idle. Its only when your revs go above say 2000rpm that its actually doing anything, and when you're cruising at constant speed it will already be starting to cool.

The reason for leaving the engine running is so that it still has oil & coolant flowing through it while it spins down and cools. These days with ball bearing turbos (incl factory one) its not as big a deal and like I said above, unless you're a leadfoot who is constantly on boost, it really is a waste of money. Even without one, it would take a lot of turning the car off while its red hot before it gets any damage. FWIW your engine also gets hot and will cool down just fine with no coolant running through it.

To put everything in perspective, if your driving style is such that your turbo is always hitting near max boost all the time, I really doubt the turbo timer will save your turbo. On the other hand, if you drive like most people, only hitting boost when accelerating and then cruising at the speed limit, you shouldn't ever need to think about it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...